467 lines
11 KiB
C
467 lines
11 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* max98095.c -- MAX98095 ALSA SoC Audio driver
|
|
*
|
|
* Copyright 2011 Maxim Integrated Products
|
|
*
|
|
* Modified for U-Boot by R. Chandrasekar (rcsekar@samsung.com)
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <audio_codec.h>
|
|
#include <dm.h>
|
|
#include <div64.h>
|
|
#include <fdtdec.h>
|
|
#include <i2c.h>
|
|
#include <log.h>
|
|
#include <sound.h>
|
|
#include <asm/gpio.h>
|
|
#include "i2s.h"
|
|
#include "max98095.h"
|
|
|
|
/* Index 0 is reserved. */
|
|
int rate_table[] = {0, 8000, 11025, 16000, 22050, 24000, 32000, 44100, 48000,
|
|
88200, 96000};
|
|
|
|
/*
|
|
* codec mclk clock divider coefficients based on sampling rate
|
|
*
|
|
* @param rate sampling rate
|
|
* @param value address of indexvalue to be stored
|
|
*
|
|
* @return 0 for success or negative error code.
|
|
*/
|
|
static int rate_value(int rate, u8 *value)
|
|
{
|
|
int i;
|
|
|
|
for (i = 1; i < ARRAY_SIZE(rate_table); i++) {
|
|
if (rate_table[i] >= rate) {
|
|
*value = i;
|
|
return 0;
|
|
}
|
|
}
|
|
*value = 1;
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
/*
|
|
* Sets hw params for max98095
|
|
*
|
|
* @param priv max98095 information pointer
|
|
* @param rate Sampling rate
|
|
* @param bits_per_sample Bits per sample
|
|
*
|
|
* @return 0 for success or negative error code.
|
|
*/
|
|
static int max98095_hw_params(struct maxim_priv *priv,
|
|
enum en_max_audio_interface aif_id,
|
|
unsigned int rate, unsigned int bits_per_sample)
|
|
{
|
|
u8 regval;
|
|
int error;
|
|
unsigned short M98095_DAI_CLKMODE;
|
|
unsigned short M98095_DAI_FORMAT;
|
|
unsigned short M98095_DAI_FILTERS;
|
|
|
|
if (aif_id == AIF1) {
|
|
M98095_DAI_CLKMODE = M98095_027_DAI1_CLKMODE;
|
|
M98095_DAI_FORMAT = M98095_02A_DAI1_FORMAT;
|
|
M98095_DAI_FILTERS = M98095_02E_DAI1_FILTERS;
|
|
} else {
|
|
M98095_DAI_CLKMODE = M98095_031_DAI2_CLKMODE;
|
|
M98095_DAI_FORMAT = M98095_034_DAI2_FORMAT;
|
|
M98095_DAI_FILTERS = M98095_038_DAI2_FILTERS;
|
|
}
|
|
|
|
switch (bits_per_sample) {
|
|
case 16:
|
|
error = maxim_bic_or(priv, M98095_DAI_FORMAT, M98095_DAI_WS, 0);
|
|
break;
|
|
case 24:
|
|
error = maxim_bic_or(priv, M98095_DAI_FORMAT, M98095_DAI_WS,
|
|
M98095_DAI_WS);
|
|
break;
|
|
default:
|
|
debug("%s: Illegal bits per sample %d.\n",
|
|
__func__, bits_per_sample);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (rate_value(rate, ®val)) {
|
|
debug("%s: Failed to set sample rate to %d.\n",
|
|
__func__, rate);
|
|
return -EINVAL;
|
|
}
|
|
priv->rate = rate;
|
|
|
|
error |= maxim_bic_or(priv, M98095_DAI_CLKMODE, M98095_CLKMODE_MASK,
|
|
regval);
|
|
|
|
/* Update sample rate mode */
|
|
if (rate < 50000)
|
|
error |= maxim_bic_or(priv, M98095_DAI_FILTERS,
|
|
M98095_DAI_DHF, 0);
|
|
else
|
|
error |= maxim_bic_or(priv, M98095_DAI_FILTERS,
|
|
M98095_DAI_DHF, M98095_DAI_DHF);
|
|
|
|
if (error < 0) {
|
|
debug("%s: Error setting hardware params.\n", __func__);
|
|
return -EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Configures Audio interface system clock for the given frequency
|
|
*
|
|
* @param priv max98095 information
|
|
* @param freq Sampling frequency in Hz
|
|
*
|
|
* @return 0 for success or negative error code.
|
|
*/
|
|
static int max98095_set_sysclk(struct maxim_priv *priv, unsigned int freq)
|
|
{
|
|
int error = 0;
|
|
|
|
/* Requested clock frequency is already setup */
|
|
if (freq == priv->sysclk)
|
|
return 0;
|
|
|
|
/* Setup clocks for slave mode, and using the PLL
|
|
* PSCLK = 0x01 (when master clk is 10MHz to 20MHz)
|
|
* 0x02 (when master clk is 20MHz to 40MHz)..
|
|
* 0x03 (when master clk is 40MHz to 60MHz)..
|
|
*/
|
|
if ((freq >= 10000000) && (freq < 20000000)) {
|
|
error = maxim_i2c_write(priv, M98095_026_SYS_CLK, 0x10);
|
|
} else if ((freq >= 20000000) && (freq < 40000000)) {
|
|
error = maxim_i2c_write(priv, M98095_026_SYS_CLK, 0x20);
|
|
} else if ((freq >= 40000000) && (freq < 60000000)) {
|
|
error = maxim_i2c_write(priv, M98095_026_SYS_CLK, 0x30);
|
|
} else {
|
|
debug("%s: Invalid master clock frequency\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
debug("%s: Clock at %uHz\n", __func__, freq);
|
|
|
|
if (error < 0)
|
|
return -EIO;
|
|
|
|
priv->sysclk = freq;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Sets Max98095 I2S format
|
|
*
|
|
* @param priv max98095 information
|
|
* @param fmt i2S format - supports a subset of the options defined
|
|
* in i2s.h.
|
|
*
|
|
* @return 0 for success or negative error code.
|
|
*/
|
|
static int max98095_set_fmt(struct maxim_priv *priv, int fmt,
|
|
enum en_max_audio_interface aif_id)
|
|
{
|
|
u8 regval = 0;
|
|
int error = 0;
|
|
unsigned short M98095_DAI_CLKCFG_HI;
|
|
unsigned short M98095_DAI_CLKCFG_LO;
|
|
unsigned short M98095_DAI_FORMAT;
|
|
unsigned short M98095_DAI_CLOCK;
|
|
|
|
if (fmt == priv->fmt)
|
|
return 0;
|
|
|
|
priv->fmt = fmt;
|
|
|
|
if (aif_id == AIF1) {
|
|
M98095_DAI_CLKCFG_HI = M98095_028_DAI1_CLKCFG_HI;
|
|
M98095_DAI_CLKCFG_LO = M98095_029_DAI1_CLKCFG_LO;
|
|
M98095_DAI_FORMAT = M98095_02A_DAI1_FORMAT;
|
|
M98095_DAI_CLOCK = M98095_02B_DAI1_CLOCK;
|
|
} else {
|
|
M98095_DAI_CLKCFG_HI = M98095_032_DAI2_CLKCFG_HI;
|
|
M98095_DAI_CLKCFG_LO = M98095_033_DAI2_CLKCFG_LO;
|
|
M98095_DAI_FORMAT = M98095_034_DAI2_FORMAT;
|
|
M98095_DAI_CLOCK = M98095_035_DAI2_CLOCK;
|
|
}
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
|
|
case SND_SOC_DAIFMT_CBS_CFS:
|
|
/* Slave mode PLL */
|
|
error |= maxim_i2c_write(priv, M98095_DAI_CLKCFG_HI, 0x80);
|
|
error |= maxim_i2c_write(priv, M98095_DAI_CLKCFG_LO, 0x00);
|
|
break;
|
|
case SND_SOC_DAIFMT_CBM_CFM:
|
|
/* Set to master mode */
|
|
regval |= M98095_DAI_MAS;
|
|
break;
|
|
case SND_SOC_DAIFMT_CBS_CFM:
|
|
case SND_SOC_DAIFMT_CBM_CFS:
|
|
default:
|
|
debug("%s: Clock mode unsupported\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
|
|
case SND_SOC_DAIFMT_I2S:
|
|
regval |= M98095_DAI_DLY;
|
|
break;
|
|
case SND_SOC_DAIFMT_LEFT_J:
|
|
break;
|
|
default:
|
|
debug("%s: Unrecognized format.\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
|
|
case SND_SOC_DAIFMT_NB_NF:
|
|
break;
|
|
case SND_SOC_DAIFMT_NB_IF:
|
|
regval |= M98095_DAI_WCI;
|
|
break;
|
|
case SND_SOC_DAIFMT_IB_NF:
|
|
regval |= M98095_DAI_BCI;
|
|
break;
|
|
case SND_SOC_DAIFMT_IB_IF:
|
|
regval |= M98095_DAI_BCI | M98095_DAI_WCI;
|
|
break;
|
|
default:
|
|
debug("%s: Unrecognized inversion settings.\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
error |= maxim_bic_or(priv, M98095_DAI_FORMAT,
|
|
M98095_DAI_MAS | M98095_DAI_DLY |
|
|
M98095_DAI_BCI | M98095_DAI_WCI, regval);
|
|
|
|
error |= maxim_i2c_write(priv, M98095_DAI_CLOCK, M98095_DAI_BSEL64);
|
|
|
|
if (error < 0) {
|
|
debug("%s: Error setting i2s format.\n", __func__);
|
|
return -EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* resets the audio codec
|
|
*
|
|
* @param priv Private data for driver
|
|
* @return 0 for success or negative error code.
|
|
*/
|
|
static int max98095_reset(struct maxim_priv *priv)
|
|
{
|
|
int i, ret;
|
|
|
|
/*
|
|
* Gracefully reset the DSP core and the codec hardware in a proper
|
|
* sequence.
|
|
*/
|
|
ret = maxim_i2c_write(priv, M98095_00F_HOST_CFG, 0);
|
|
if (ret != 0) {
|
|
debug("%s: Failed to reset DSP: %d\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = maxim_i2c_write(priv, M98095_097_PWR_SYS, 0);
|
|
if (ret != 0) {
|
|
debug("%s: Failed to reset codec: %d\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Reset to hardware default for registers, as there is not a soft
|
|
* reset hardware control register.
|
|
*/
|
|
for (i = M98095_010_HOST_INT_CFG; i < M98095_REG_MAX_CACHED; i++) {
|
|
ret = maxim_i2c_write(priv, i, 0);
|
|
if (ret < 0) {
|
|
debug("%s: Failed to reset: %d\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Intialise max98095 codec device
|
|
*
|
|
* @param priv max98095 information
|
|
* @return 0 for success or negative error code.
|
|
*/
|
|
static int max98095_device_init(struct maxim_priv *priv)
|
|
{
|
|
unsigned char id;
|
|
int ret;
|
|
|
|
/* reset the codec, the DSP core, and disable all interrupts */
|
|
ret = max98095_reset(priv);
|
|
if (ret != 0) {
|
|
debug("Reset\n");
|
|
return ret;
|
|
}
|
|
|
|
/* initialize private data */
|
|
priv->sysclk = -1U;
|
|
priv->rate = -1U;
|
|
priv->fmt = -1U;
|
|
|
|
ret = maxim_i2c_read(priv, M98095_0FF_REV_ID, &id);
|
|
if (ret < 0) {
|
|
debug("%s: Failure reading hardware revision: %d\n",
|
|
__func__, id);
|
|
return ret;
|
|
}
|
|
debug("%s: Hardware revision: %c\n", __func__, (id - 0x40) + 'A');
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int max98095_setup_interface(struct maxim_priv *priv,
|
|
enum en_max_audio_interface aif_id)
|
|
{
|
|
int error;
|
|
|
|
error = maxim_i2c_write(priv, M98095_097_PWR_SYS, M98095_PWRSV);
|
|
|
|
/*
|
|
* initialize registers to hardware default configuring audio
|
|
* interface2 to DAC
|
|
*/
|
|
if (aif_id == AIF1)
|
|
error |= maxim_i2c_write(priv, M98095_048_MIX_DAC_LR,
|
|
M98095_DAI1L_TO_DACL |
|
|
M98095_DAI1R_TO_DACR);
|
|
else
|
|
error |= maxim_i2c_write(priv, M98095_048_MIX_DAC_LR,
|
|
M98095_DAI2M_TO_DACL |
|
|
M98095_DAI2M_TO_DACR);
|
|
|
|
error |= maxim_i2c_write(priv, M98095_092_PWR_EN_OUT,
|
|
M98095_SPK_SPREADSPECTRUM);
|
|
error |= maxim_i2c_write(priv, M98095_04E_CFG_HP, M98095_HPNORMAL);
|
|
if (aif_id == AIF1)
|
|
error |= maxim_i2c_write(priv, M98095_02C_DAI1_IOCFG,
|
|
M98095_S1NORMAL | M98095_SDATA);
|
|
else
|
|
error |= maxim_i2c_write(priv, M98095_036_DAI2_IOCFG,
|
|
M98095_S2NORMAL | M98095_SDATA);
|
|
|
|
/* take the codec out of the shut down */
|
|
error |= maxim_bic_or(priv, M98095_097_PWR_SYS, M98095_SHDNRUN,
|
|
M98095_SHDNRUN);
|
|
/*
|
|
* route DACL and DACR output to HO and Speakers
|
|
* Ordering: DACL, DACR, DACL, DACR
|
|
*/
|
|
error |= maxim_i2c_write(priv, M98095_050_MIX_SPK_LEFT, 0x01);
|
|
error |= maxim_i2c_write(priv, M98095_051_MIX_SPK_RIGHT, 0x01);
|
|
error |= maxim_i2c_write(priv, M98095_04C_MIX_HP_LEFT, 0x01);
|
|
error |= maxim_i2c_write(priv, M98095_04D_MIX_HP_RIGHT, 0x01);
|
|
|
|
/* power Enable */
|
|
error |= maxim_i2c_write(priv, M98095_091_PWR_EN_OUT, 0xF3);
|
|
|
|
/* set Volume */
|
|
error |= maxim_i2c_write(priv, M98095_064_LVL_HP_L, 15);
|
|
error |= maxim_i2c_write(priv, M98095_065_LVL_HP_R, 15);
|
|
error |= maxim_i2c_write(priv, M98095_067_LVL_SPK_L, 16);
|
|
error |= maxim_i2c_write(priv, M98095_068_LVL_SPK_R, 16);
|
|
|
|
/* Enable DAIs */
|
|
error |= maxim_i2c_write(priv, M98095_093_BIAS_CTRL, 0x30);
|
|
if (aif_id == AIF1)
|
|
error |= maxim_i2c_write(priv, M98095_096_PWR_DAC_CK, 0x01);
|
|
else
|
|
error |= maxim_i2c_write(priv, M98095_096_PWR_DAC_CK, 0x07);
|
|
|
|
if (error < 0)
|
|
return -EIO;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int max98095_do_init(struct maxim_priv *priv,
|
|
enum en_max_audio_interface aif_id,
|
|
int sampling_rate, int mclk_freq,
|
|
int bits_per_sample)
|
|
{
|
|
int ret = 0;
|
|
|
|
ret = max98095_setup_interface(priv, aif_id);
|
|
if (ret < 0) {
|
|
debug("%s: max98095 setup interface failed\n", __func__);
|
|
return ret;
|
|
}
|
|
|
|
ret = max98095_set_sysclk(priv, mclk_freq);
|
|
if (ret < 0) {
|
|
debug("%s: max98095 codec set sys clock failed\n", __func__);
|
|
return ret;
|
|
}
|
|
|
|
ret = max98095_hw_params(priv, aif_id, sampling_rate,
|
|
bits_per_sample);
|
|
|
|
if (ret == 0) {
|
|
ret = max98095_set_fmt(priv, SND_SOC_DAIFMT_I2S |
|
|
SND_SOC_DAIFMT_NB_NF |
|
|
SND_SOC_DAIFMT_CBS_CFS,
|
|
aif_id);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int max98095_set_params(struct udevice *dev, int interface, int rate,
|
|
int mclk_freq, int bits_per_sample,
|
|
uint channels)
|
|
{
|
|
struct maxim_priv *priv = dev_get_priv(dev);
|
|
|
|
return max98095_do_init(priv, interface, rate, mclk_freq,
|
|
bits_per_sample);
|
|
}
|
|
|
|
static int max98095_probe(struct udevice *dev)
|
|
{
|
|
struct maxim_priv *priv = dev_get_priv(dev);
|
|
int ret;
|
|
|
|
priv->dev = dev;
|
|
ret = max98095_device_init(priv);
|
|
if (ret < 0) {
|
|
debug("%s: max98095 codec chip init failed\n", __func__);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct audio_codec_ops max98095_ops = {
|
|
.set_params = max98095_set_params,
|
|
};
|
|
|
|
static const struct udevice_id max98095_ids[] = {
|
|
{ .compatible = "maxim,max98095" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(max98095) = {
|
|
.name = "max98095",
|
|
.id = UCLASS_AUDIO_CODEC,
|
|
.of_match = max98095_ids,
|
|
.probe = max98095_probe,
|
|
.ops = &max98095_ops,
|
|
.priv_auto_alloc_size = sizeof(struct maxim_priv),
|
|
};
|