334 lines
8.2 KiB
C
334 lines
8.2 KiB
C
/*
|
|
* Copyright 2013 Texas Instruments, Inc.
|
|
* Author: Dan Murphy <dmurphy@ti.com>
|
|
*
|
|
* Derived work from the pca953x.c driver
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <i2c.h>
|
|
#include <tca642x.h>
|
|
|
|
/* tca642x register address definitions */
|
|
struct tca642x_bank_info tca642x_regs[] = {
|
|
{ .input_reg = 0x00,
|
|
.output_reg = 0x04,
|
|
.polarity_reg = 0x08,
|
|
.configuration_reg = 0x0c },
|
|
{ .input_reg = 0x01,
|
|
.output_reg = 0x05,
|
|
.polarity_reg = 0x09,
|
|
.configuration_reg = 0x0d },
|
|
{ .input_reg = 0x02,
|
|
.output_reg = 0x06,
|
|
.polarity_reg = 0x0a,
|
|
.configuration_reg = 0x0e },
|
|
};
|
|
|
|
/*
|
|
* Modify masked bits in register
|
|
*/
|
|
static int tca642x_reg_write(uchar chip, uint8_t addr,
|
|
uint8_t reg_bit, uint8_t data)
|
|
{
|
|
uint8_t valw;
|
|
int org_bus_num;
|
|
int ret;
|
|
|
|
org_bus_num = i2c_get_bus_num();
|
|
i2c_set_bus_num(CONFIG_SYS_I2C_TCA642X_BUS_NUM);
|
|
|
|
if (i2c_read(chip, addr, 1, (uint8_t *)&valw, 1)) {
|
|
printf("Could not read before writing\n");
|
|
ret = -1;
|
|
goto error;
|
|
}
|
|
valw &= ~reg_bit;
|
|
valw |= data;
|
|
|
|
ret = i2c_write(chip, addr, 1, (u8 *)&valw, 1);
|
|
|
|
error:
|
|
i2c_set_bus_num(org_bus_num);
|
|
return ret;
|
|
}
|
|
|
|
static int tca642x_reg_read(uchar chip, uint8_t addr, uint8_t *data)
|
|
{
|
|
uint8_t valw;
|
|
int org_bus_num;
|
|
int ret = 0;
|
|
|
|
org_bus_num = i2c_get_bus_num();
|
|
i2c_set_bus_num(CONFIG_SYS_I2C_TCA642X_BUS_NUM);
|
|
if (i2c_read(chip, addr, 1, (u8 *)&valw, 1)) {
|
|
ret = -1;
|
|
goto error;
|
|
}
|
|
|
|
*data = valw;
|
|
|
|
error:
|
|
i2c_set_bus_num(org_bus_num);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Set output value of IO pins in 'reg_bit' to corresponding value in 'data'
|
|
* 0 = low, 1 = high
|
|
*/
|
|
int tca642x_set_val(uchar chip, uint8_t gpio_bank,
|
|
uint8_t reg_bit, uint8_t data)
|
|
{
|
|
uint8_t out_reg = tca642x_regs[gpio_bank].output_reg;
|
|
|
|
return tca642x_reg_write(chip, out_reg, reg_bit, data);
|
|
}
|
|
|
|
/*
|
|
* Set read polarity of IO pins in 'reg_bit' to corresponding value in 'data'
|
|
* 0 = read pin value, 1 = read inverted pin value
|
|
*/
|
|
int tca642x_set_pol(uchar chip, uint8_t gpio_bank,
|
|
uint8_t reg_bit, uint8_t data)
|
|
{
|
|
uint8_t pol_reg = tca642x_regs[gpio_bank].polarity_reg;
|
|
|
|
return tca642x_reg_write(chip, pol_reg, reg_bit, data);
|
|
}
|
|
|
|
/*
|
|
* Set direction of IO pins in 'reg_bit' to corresponding value in 'data'
|
|
* 0 = output, 1 = input
|
|
*/
|
|
int tca642x_set_dir(uchar chip, uint8_t gpio_bank,
|
|
uint8_t reg_bit, uint8_t data)
|
|
{
|
|
uint8_t config_reg = tca642x_regs[gpio_bank].configuration_reg;
|
|
|
|
return tca642x_reg_write(chip, config_reg, reg_bit, data);
|
|
}
|
|
|
|
/*
|
|
* Read current logic level of all IO pins
|
|
*/
|
|
int tca642x_get_val(uchar chip, uint8_t gpio_bank)
|
|
{
|
|
uint8_t val;
|
|
uint8_t in_reg = tca642x_regs[gpio_bank].input_reg;
|
|
|
|
if (tca642x_reg_read(chip, in_reg, &val) < 0)
|
|
return -1;
|
|
|
|
return (int)val;
|
|
}
|
|
|
|
/*
|
|
* Set the inital register states for the tca642x gpio expander
|
|
*/
|
|
int tca642x_set_inital_state(uchar chip, struct tca642x_bank_info init_data[])
|
|
{
|
|
int i, ret;
|
|
uint8_t config_reg;
|
|
uint8_t polarity_reg;
|
|
uint8_t output_reg;
|
|
|
|
for (i = 0; i < 3; i++) {
|
|
config_reg = tca642x_regs[i].configuration_reg;
|
|
ret = tca642x_reg_write(chip, config_reg, 0xff,
|
|
init_data[i].configuration_reg);
|
|
polarity_reg = tca642x_regs[i].polarity_reg;
|
|
ret = tca642x_reg_write(chip, polarity_reg, 0xff,
|
|
init_data[i].polarity_reg);
|
|
output_reg = tca642x_regs[i].output_reg;
|
|
ret = tca642x_reg_write(chip, output_reg, 0xff,
|
|
init_data[i].output_reg);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
#if defined(CONFIG_CMD_TCA642X) && !defined(CONFIG_SPL_BUILD)
|
|
/*
|
|
* Display tca642x information
|
|
*/
|
|
static int tca642x_info(uchar chip)
|
|
{
|
|
int i, j;
|
|
uint8_t data;
|
|
|
|
printf("tca642x@ 0x%x (%d pins):\n", chip, 24);
|
|
for (i = 0; i < 3; i++) {
|
|
printf("Bank %i\n", i);
|
|
if (tca642x_reg_read(chip,
|
|
tca642x_regs[i].configuration_reg,
|
|
&data) < 0)
|
|
return -1;
|
|
printf("\tConfiguration: ");
|
|
for (j = 7; j >= 0; j--)
|
|
printf("%c", data & (1 << j) ? 'i' : 'o');
|
|
printf("\n");
|
|
|
|
if (tca642x_reg_read(chip,
|
|
tca642x_regs[i].polarity_reg, &data) < 0)
|
|
return -1;
|
|
printf("\tPolarity: ");
|
|
for (j = 7; j >= 0; j--)
|
|
printf("%c", data & (1 << j) ? '1' : '0');
|
|
printf("\n");
|
|
|
|
if (tca642x_reg_read(chip,
|
|
tca642x_regs[i].input_reg, &data) < 0)
|
|
return -1;
|
|
printf("\tInput value: ");
|
|
for (j = 7; j >= 0; j--)
|
|
printf("%c", data & (1 << j) ? '1' : '0');
|
|
printf("\n");
|
|
|
|
if (tca642x_reg_read(chip,
|
|
tca642x_regs[i].output_reg, &data) < 0)
|
|
return -1;
|
|
printf("\tOutput value: ");
|
|
for (j = 7; j >= 0; j--)
|
|
printf("%c", data & (1 << j) ? '1' : '0');
|
|
printf("\n");
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static cmd_tbl_t cmd_tca642x[] = {
|
|
U_BOOT_CMD_MKENT(device, 3, 0, (void *)TCA642X_CMD_DEVICE, "", ""),
|
|
U_BOOT_CMD_MKENT(output, 4, 0, (void *)TCA642X_CMD_OUTPUT, "", ""),
|
|
U_BOOT_CMD_MKENT(input, 3, 0, (void *)TCA642X_CMD_INPUT, "", ""),
|
|
U_BOOT_CMD_MKENT(invert, 4, 0, (void *)TCA642X_CMD_INVERT, "", ""),
|
|
U_BOOT_CMD_MKENT(info, 2, 0, (void *)TCA642X_CMD_INFO, "", ""),
|
|
};
|
|
|
|
static int do_tca642x(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
static uchar chip = CONFIG_SYS_I2C_TCA642X_ADDR;
|
|
int ret = CMD_RET_USAGE, val;
|
|
uint8_t gpio_bank = 0;
|
|
uint8_t bank_shift;
|
|
ulong ul_arg2 = 0;
|
|
ulong ul_arg3 = 0;
|
|
cmd_tbl_t *c;
|
|
|
|
c = find_cmd_tbl(argv[1], cmd_tca642x, ARRAY_SIZE(cmd_tca642x));
|
|
|
|
/* All commands but "device" require 'maxargs' arguments */
|
|
if (!c ||
|
|
!((argc == (c->maxargs)) ||
|
|
(((int)c->cmd == TCA642X_CMD_DEVICE) &&
|
|
(argc == (c->maxargs - 1))))) {
|
|
return CMD_RET_USAGE;
|
|
}
|
|
|
|
/* arg2 used as chip number or pin number */
|
|
if (argc > 2)
|
|
ul_arg2 = simple_strtoul(argv[2], NULL, 10);
|
|
|
|
/* arg3 used as pin or invert value */
|
|
if (argc > 3) {
|
|
ul_arg3 = simple_strtoul(argv[3], NULL, 10) & 0x1;
|
|
if (ul_arg2 <= 7) {
|
|
gpio_bank = 0;
|
|
} else if ((ul_arg2 >= 10) && (ul_arg2 <= 17)) {
|
|
gpio_bank = 1;
|
|
} else if ((ul_arg2 >= 20) && (ul_arg2 <= 27)) {
|
|
gpio_bank = 2;
|
|
} else {
|
|
printf("Requested pin is not available\n");
|
|
ret = CMD_RET_FAILURE;
|
|
goto error;
|
|
}
|
|
}
|
|
|
|
switch ((int)c->cmd) {
|
|
case TCA642X_CMD_INFO:
|
|
ret = tca642x_info(chip);
|
|
if (ret)
|
|
ret = CMD_RET_FAILURE;
|
|
break;
|
|
|
|
case TCA642X_CMD_DEVICE:
|
|
if (argc == 3)
|
|
chip = (uint8_t)ul_arg2;
|
|
printf("Current device address: 0x%x\n", chip);
|
|
ret = CMD_RET_SUCCESS;
|
|
break;
|
|
|
|
case TCA642X_CMD_INPUT:
|
|
bank_shift = ul_arg2 - (gpio_bank * 10);
|
|
ret = tca642x_set_dir(chip, gpio_bank, (1 << bank_shift),
|
|
TCA642X_DIR_IN << bank_shift);
|
|
val = (tca642x_get_val(chip, gpio_bank) &
|
|
(1 << bank_shift)) != 0;
|
|
|
|
if (ret)
|
|
ret = CMD_RET_FAILURE;
|
|
else
|
|
printf("chip 0x%02x, pin 0x%lx = %d\n", chip,
|
|
ul_arg2, val);
|
|
break;
|
|
|
|
case TCA642X_CMD_OUTPUT:
|
|
bank_shift = ul_arg2 - (gpio_bank * 10);
|
|
ret = tca642x_set_dir(chip, gpio_bank, (1 << bank_shift),
|
|
(TCA642X_DIR_OUT << bank_shift));
|
|
if (!ret)
|
|
ret = tca642x_set_val(chip,
|
|
gpio_bank, (1 << bank_shift),
|
|
(ul_arg3 << bank_shift));
|
|
if (ret)
|
|
ret = CMD_RET_FAILURE;
|
|
break;
|
|
|
|
case TCA642X_CMD_INVERT:
|
|
bank_shift = ul_arg2 - (gpio_bank * 10);
|
|
ret = tca642x_set_pol(chip, gpio_bank, (1 << bank_shift),
|
|
(ul_arg3 << bank_shift));
|
|
if (ret)
|
|
ret = CMD_RET_FAILURE;
|
|
break;
|
|
}
|
|
error:
|
|
if (ret == CMD_RET_FAILURE)
|
|
eprintf("Error talking to chip at 0x%x\n", chip);
|
|
|
|
return ret;
|
|
}
|
|
|
|
U_BOOT_CMD(
|
|
tca642x, 5, 1, do_tca642x,
|
|
"tca642x gpio access",
|
|
"device [dev]\n"
|
|
" - show or set current device address\n"
|
|
"tca642x info\n"
|
|
" - display info for current chip\n"
|
|
"tca642x output pin 0|1\n"
|
|
" - set pin as output and drive low or high\n"
|
|
"tca642x invert pin 0|1\n"
|
|
" - disable/enable polarity inversion for reads\n"
|
|
"tca642x input pin\n"
|
|
" - set pin as input and read value"
|
|
);
|
|
|
|
#endif /* CONFIG_CMD_TCA642X */
|