473 lines
		
	
	
		
			12 KiB
		
	
	
	
		
			C
		
	
	
	
			
		
		
	
	
			473 lines
		
	
	
		
			12 KiB
		
	
	
	
		
			C
		
	
	
	
| /*
 | |
|  * spi driver for rockchip
 | |
|  *
 | |
|  * (C) Copyright 2015 Google, Inc
 | |
|  *
 | |
|  * (C) Copyright 2008-2013 Rockchip Electronics
 | |
|  * Peter, Software Engineering, <superpeter.cai@gmail.com>.
 | |
|  *
 | |
|  * SPDX-License-Identifier:     GPL-2.0+
 | |
|  */
 | |
| 
 | |
| #include <common.h>
 | |
| #include <clk.h>
 | |
| #include <dm.h>
 | |
| #include <dt-structs.h>
 | |
| #include <errno.h>
 | |
| #include <spi.h>
 | |
| #include <linux/errno.h>
 | |
| #include <asm/io.h>
 | |
| #include <asm/arch/clock.h>
 | |
| #include <asm/arch/periph.h>
 | |
| #include <dm/pinctrl.h>
 | |
| #include "rk_spi.h"
 | |
| 
 | |
| DECLARE_GLOBAL_DATA_PTR;
 | |
| 
 | |
| /* Change to 1 to output registers at the start of each transaction */
 | |
| #define DEBUG_RK_SPI	0
 | |
| 
 | |
| struct rockchip_spi_platdata {
 | |
| #if CONFIG_IS_ENABLED(OF_PLATDATA)
 | |
| 	struct dtd_rockchip_rk3288_spi of_plat;
 | |
| #endif
 | |
| 	s32 frequency;		/* Default clock frequency, -1 for none */
 | |
| 	fdt_addr_t base;
 | |
| 	uint deactivate_delay_us;	/* Delay to wait after deactivate */
 | |
| 	uint activate_delay_us;		/* Delay to wait after activate */
 | |
| };
 | |
| 
 | |
| struct rockchip_spi_priv {
 | |
| 	struct rockchip_spi *regs;
 | |
| 	struct clk clk;
 | |
| 	unsigned int max_freq;
 | |
| 	unsigned int mode;
 | |
| 	ulong last_transaction_us;	/* Time of last transaction end */
 | |
| 	u8 bits_per_word;		/* max 16 bits per word */
 | |
| 	u8 n_bytes;
 | |
| 	unsigned int speed_hz;
 | |
| 	unsigned int last_speed_hz;
 | |
| 	unsigned int tmode;
 | |
| 	uint input_rate;
 | |
| };
 | |
| 
 | |
| #define SPI_FIFO_DEPTH		32
 | |
| 
 | |
| static void rkspi_dump_regs(struct rockchip_spi *regs)
 | |
| {
 | |
| 	debug("ctrl0: \t\t0x%08x\n", readl(®s->ctrlr0));
 | |
| 	debug("ctrl1: \t\t0x%08x\n", readl(®s->ctrlr1));
 | |
| 	debug("ssienr: \t\t0x%08x\n", readl(®s->enr));
 | |
| 	debug("ser: \t\t0x%08x\n", readl(®s->ser));
 | |
| 	debug("baudr: \t\t0x%08x\n", readl(®s->baudr));
 | |
| 	debug("txftlr: \t\t0x%08x\n", readl(®s->txftlr));
 | |
| 	debug("rxftlr: \t\t0x%08x\n", readl(®s->rxftlr));
 | |
| 	debug("txflr: \t\t0x%08x\n", readl(®s->txflr));
 | |
| 	debug("rxflr: \t\t0x%08x\n", readl(®s->rxflr));
 | |
| 	debug("sr: \t\t0x%08x\n", readl(®s->sr));
 | |
| 	debug("imr: \t\t0x%08x\n", readl(®s->imr));
 | |
| 	debug("isr: \t\t0x%08x\n", readl(®s->isr));
 | |
| 	debug("dmacr: \t\t0x%08x\n", readl(®s->dmacr));
 | |
| 	debug("dmatdlr: \t0x%08x\n", readl(®s->dmatdlr));
 | |
| 	debug("dmardlr: \t0x%08x\n", readl(®s->dmardlr));
 | |
| }
 | |
| 
 | |
| static void rkspi_enable_chip(struct rockchip_spi *regs, bool enable)
 | |
| {
 | |
| 	writel(enable ? 1 : 0, ®s->enr);
 | |
| }
 | |
| 
 | |
| static void rkspi_set_clk(struct rockchip_spi_priv *priv, uint speed)
 | |
| {
 | |
| 	/*
 | |
| 	 * We should try not to exceed the speed requested by the caller:
 | |
| 	 * when selecting a divider, we need to make sure we round up.
 | |
| 	 */
 | |
| 	uint clk_div = DIV_ROUND_UP(priv->input_rate, speed);
 | |
| 
 | |
| 	/* The baudrate register (BAUDR) is defined as a 32bit register where
 | |
| 	 * the upper 16bit are reserved and having 'Fsclk_out' in the lower
 | |
| 	 * 16bits with 'Fsclk_out' defined as follows:
 | |
| 	 *
 | |
| 	 *   Fsclk_out = Fspi_clk/ SCKDV
 | |
| 	 *   Where SCKDV is any even value between 2 and 65534.
 | |
| 	 */
 | |
| 	if (clk_div > 0xfffe) {
 | |
| 		clk_div = 0xfffe;
 | |
| 		debug("%s: can't divide down to %d Hz (actual will be %d Hz)\n",
 | |
| 		      __func__, speed, priv->input_rate / clk_div);
 | |
| 	}
 | |
| 
 | |
| 	/* Round up to the next even 16bit number */
 | |
| 	clk_div = (clk_div + 1) & 0xfffe;
 | |
| 
 | |
| 	debug("spi speed %u, div %u\n", speed, clk_div);
 | |
| 
 | |
| 	clrsetbits_le32(&priv->regs->baudr, 0xffff, clk_div);
 | |
| 	priv->last_speed_hz = speed;
 | |
| }
 | |
| 
 | |
| static int rkspi_wait_till_not_busy(struct rockchip_spi *regs)
 | |
| {
 | |
| 	unsigned long start;
 | |
| 
 | |
| 	start = get_timer(0);
 | |
| 	while (readl(®s->sr) & SR_BUSY) {
 | |
| 		if (get_timer(start) > ROCKCHIP_SPI_TIMEOUT_MS) {
 | |
| 			debug("RK SPI: Status keeps busy for 1000us after a read/write!\n");
 | |
| 			return -ETIMEDOUT;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static void spi_cs_activate(struct udevice *dev, uint cs)
 | |
| {
 | |
| 	struct udevice *bus = dev->parent;
 | |
| 	struct rockchip_spi_platdata *plat = bus->platdata;
 | |
| 	struct rockchip_spi_priv *priv = dev_get_priv(bus);
 | |
| 	struct rockchip_spi *regs = priv->regs;
 | |
| 
 | |
| 	/* If it's too soon to do another transaction, wait */
 | |
| 	if (plat->deactivate_delay_us && priv->last_transaction_us) {
 | |
| 		ulong delay_us;		/* The delay completed so far */
 | |
| 		delay_us = timer_get_us() - priv->last_transaction_us;
 | |
| 		if (delay_us < plat->deactivate_delay_us)
 | |
| 			udelay(plat->deactivate_delay_us - delay_us);
 | |
| 	}
 | |
| 
 | |
| 	debug("activate cs%u\n", cs);
 | |
| 	writel(1 << cs, ®s->ser);
 | |
| 	if (plat->activate_delay_us)
 | |
| 		udelay(plat->activate_delay_us);
 | |
| }
 | |
| 
 | |
| static void spi_cs_deactivate(struct udevice *dev, uint cs)
 | |
| {
 | |
| 	struct udevice *bus = dev->parent;
 | |
| 	struct rockchip_spi_platdata *plat = bus->platdata;
 | |
| 	struct rockchip_spi_priv *priv = dev_get_priv(bus);
 | |
| 	struct rockchip_spi *regs = priv->regs;
 | |
| 
 | |
| 	debug("deactivate cs%u\n", cs);
 | |
| 	writel(0, ®s->ser);
 | |
| 
 | |
| 	/* Remember time of this transaction so we can honour the bus delay */
 | |
| 	if (plat->deactivate_delay_us)
 | |
| 		priv->last_transaction_us = timer_get_us();
 | |
| }
 | |
| 
 | |
| #if CONFIG_IS_ENABLED(OF_PLATDATA)
 | |
| static int conv_of_platdata(struct udevice *dev)
 | |
| {
 | |
| 	struct rockchip_spi_platdata *plat = dev->platdata;
 | |
| 	struct dtd_rockchip_rk3288_spi *dtplat = &plat->of_plat;
 | |
| 	struct rockchip_spi_priv *priv = dev_get_priv(dev);
 | |
| 	int ret;
 | |
| 
 | |
| 	plat->base = dtplat->reg[0];
 | |
| 	plat->frequency = 20000000;
 | |
| 	ret = clk_get_by_index_platdata(dev, 0, dtplat->clocks, &priv->clk);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 	dev->req_seq = 0;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| #endif
 | |
| 
 | |
| static int rockchip_spi_ofdata_to_platdata(struct udevice *bus)
 | |
| {
 | |
| #if !CONFIG_IS_ENABLED(OF_PLATDATA)
 | |
| 	struct rockchip_spi_platdata *plat = dev_get_platdata(bus);
 | |
| 	struct rockchip_spi_priv *priv = dev_get_priv(bus);
 | |
| 	int ret;
 | |
| 
 | |
| 	plat->base = dev_read_addr(bus);
 | |
| 
 | |
| 	ret = clk_get_by_index(bus, 0, &priv->clk);
 | |
| 	if (ret < 0) {
 | |
| 		debug("%s: Could not get clock for %s: %d\n", __func__,
 | |
| 		      bus->name, ret);
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	plat->frequency =
 | |
| 		dev_read_u32_default(bus, "spi-max-frequency", 50000000);
 | |
| 	plat->deactivate_delay_us =
 | |
| 		dev_read_u32_default(bus, "spi-deactivate-delay", 0);
 | |
| 	plat->activate_delay_us =
 | |
| 		dev_read_u32_default(bus, "spi-activate-delay", 0);
 | |
| 
 | |
| 	debug("%s: base=%x, max-frequency=%d, deactivate_delay=%d\n",
 | |
| 	      __func__, (uint)plat->base, plat->frequency,
 | |
| 	      plat->deactivate_delay_us);
 | |
| #endif
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int rockchip_spi_calc_modclk(ulong max_freq)
 | |
| {
 | |
| 	/*
 | |
| 	 * While this is not strictly correct for the RK3368, as the
 | |
| 	 * GPLL will be 576MHz, things will still work, as the
 | |
| 	 * clk_set_rate(...) implementation in our clock-driver will
 | |
| 	 * chose the next closest rate not exceeding what we request
 | |
| 	 * based on the output of this function.
 | |
| 	 */
 | |
| 
 | |
| 	unsigned div;
 | |
| 	const unsigned long gpll_hz = 594000000UL;
 | |
| 
 | |
| 	/*
 | |
| 	 * We need to find an input clock that provides at least twice
 | |
| 	 * the maximum frequency and can be generated from the assumed
 | |
| 	 * speed of GPLL (594MHz) using an integer divider.
 | |
| 	 *
 | |
| 	 * To give us more achievable bitrates at higher speeds (these
 | |
| 	 * are generated by dividing by an even 16-bit integer from
 | |
| 	 * this frequency), we try to have an input frequency of at
 | |
| 	 * least 4x our max_freq.
 | |
| 	 */
 | |
| 
 | |
| 	div = DIV_ROUND_UP(gpll_hz, max_freq * 4);
 | |
| 	return gpll_hz / div;
 | |
| }
 | |
| 
 | |
| static int rockchip_spi_probe(struct udevice *bus)
 | |
| {
 | |
| 	struct rockchip_spi_platdata *plat = dev_get_platdata(bus);
 | |
| 	struct rockchip_spi_priv *priv = dev_get_priv(bus);
 | |
| 	int ret;
 | |
| 
 | |
| 	debug("%s: probe\n", __func__);
 | |
| #if CONFIG_IS_ENABLED(OF_PLATDATA)
 | |
| 	ret = conv_of_platdata(bus);
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| #endif
 | |
| 	priv->regs = (struct rockchip_spi *)plat->base;
 | |
| 
 | |
| 	priv->last_transaction_us = timer_get_us();
 | |
| 	priv->max_freq = plat->frequency;
 | |
| 
 | |
| 	/* Clamp the value from the DTS against any hardware limits */
 | |
| 	if (priv->max_freq > ROCKCHIP_SPI_MAX_RATE)
 | |
| 		priv->max_freq = ROCKCHIP_SPI_MAX_RATE;
 | |
| 
 | |
| 	/* Find a module-input clock that fits with the max_freq setting */
 | |
| 	ret = clk_set_rate(&priv->clk,
 | |
| 			   rockchip_spi_calc_modclk(priv->max_freq));
 | |
| 	if (ret < 0) {
 | |
| 		debug("%s: Failed to set clock: %d\n", __func__, ret);
 | |
| 		return ret;
 | |
| 	}
 | |
| 	priv->input_rate = ret;
 | |
| 	debug("%s: rate = %u\n", __func__, priv->input_rate);
 | |
| 	priv->bits_per_word = 8;
 | |
| 	priv->tmode = TMOD_TR; /* Tx & Rx */
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int rockchip_spi_claim_bus(struct udevice *dev)
 | |
| {
 | |
| 	struct udevice *bus = dev->parent;
 | |
| 	struct rockchip_spi_priv *priv = dev_get_priv(bus);
 | |
| 	struct rockchip_spi *regs = priv->regs;
 | |
| 	u8 spi_dfs, spi_tf;
 | |
| 	uint ctrlr0;
 | |
| 
 | |
| 	/* Disable the SPI hardware */
 | |
| 	rkspi_enable_chip(regs, 0);
 | |
| 
 | |
| 	switch (priv->bits_per_word) {
 | |
| 	case 8:
 | |
| 		priv->n_bytes = 1;
 | |
| 		spi_dfs = DFS_8BIT;
 | |
| 		spi_tf = HALF_WORD_OFF;
 | |
| 		break;
 | |
| 	case 16:
 | |
| 		priv->n_bytes = 2;
 | |
| 		spi_dfs = DFS_16BIT;
 | |
| 		spi_tf = HALF_WORD_ON;
 | |
| 		break;
 | |
| 	default:
 | |
| 		debug("%s: unsupported bits: %dbits\n", __func__,
 | |
| 		      priv->bits_per_word);
 | |
| 		return -EPROTONOSUPPORT;
 | |
| 	}
 | |
| 
 | |
| 	if (priv->speed_hz != priv->last_speed_hz)
 | |
| 		rkspi_set_clk(priv, priv->speed_hz);
 | |
| 
 | |
| 	/* Operation Mode */
 | |
| 	ctrlr0 = OMOD_MASTER << OMOD_SHIFT;
 | |
| 
 | |
| 	/* Data Frame Size */
 | |
| 	ctrlr0 |= spi_dfs << DFS_SHIFT;
 | |
| 
 | |
| 	/* set SPI mode 0..3 */
 | |
| 	if (priv->mode & SPI_CPOL)
 | |
| 		ctrlr0 |= SCOL_HIGH << SCOL_SHIFT;
 | |
| 	if (priv->mode & SPI_CPHA)
 | |
| 		ctrlr0 |= SCPH_TOGSTA << SCPH_SHIFT;
 | |
| 
 | |
| 	/* Chip Select Mode */
 | |
| 	ctrlr0 |= CSM_KEEP << CSM_SHIFT;
 | |
| 
 | |
| 	/* SSN to Sclk_out delay */
 | |
| 	ctrlr0 |= SSN_DELAY_ONE << SSN_DELAY_SHIFT;
 | |
| 
 | |
| 	/* Serial Endian Mode */
 | |
| 	ctrlr0 |= SEM_LITTLE << SEM_SHIFT;
 | |
| 
 | |
| 	/* First Bit Mode */
 | |
| 	ctrlr0 |= FBM_MSB << FBM_SHIFT;
 | |
| 
 | |
| 	/* Byte and Halfword Transform */
 | |
| 	ctrlr0 |= spi_tf << HALF_WORD_TX_SHIFT;
 | |
| 
 | |
| 	/* Rxd Sample Delay */
 | |
| 	ctrlr0 |= 0 << RXDSD_SHIFT;
 | |
| 
 | |
| 	/* Frame Format */
 | |
| 	ctrlr0 |= FRF_SPI << FRF_SHIFT;
 | |
| 
 | |
| 	/* Tx and Rx mode */
 | |
| 	ctrlr0 |= (priv->tmode & TMOD_MASK) << TMOD_SHIFT;
 | |
| 
 | |
| 	writel(ctrlr0, ®s->ctrlr0);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int rockchip_spi_release_bus(struct udevice *dev)
 | |
| {
 | |
| 	struct udevice *bus = dev->parent;
 | |
| 	struct rockchip_spi_priv *priv = dev_get_priv(bus);
 | |
| 
 | |
| 	rkspi_enable_chip(priv->regs, false);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int rockchip_spi_xfer(struct udevice *dev, unsigned int bitlen,
 | |
| 			   const void *dout, void *din, unsigned long flags)
 | |
| {
 | |
| 	struct udevice *bus = dev->parent;
 | |
| 	struct rockchip_spi_priv *priv = dev_get_priv(bus);
 | |
| 	struct rockchip_spi *regs = priv->regs;
 | |
| 	struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev);
 | |
| 	int len = bitlen >> 3;
 | |
| 	const u8 *out = dout;
 | |
| 	u8 *in = din;
 | |
| 	int toread, towrite;
 | |
| 	int ret;
 | |
| 
 | |
| 	debug("%s: dout=%p, din=%p, len=%x, flags=%lx\n", __func__, dout, din,
 | |
| 	      len, flags);
 | |
| 	if (DEBUG_RK_SPI)
 | |
| 		rkspi_dump_regs(regs);
 | |
| 
 | |
| 	/* Assert CS before transfer */
 | |
| 	if (flags & SPI_XFER_BEGIN)
 | |
| 		spi_cs_activate(dev, slave_plat->cs);
 | |
| 
 | |
| 	while (len > 0) {
 | |
| 		int todo = min(len, 0xffff);
 | |
| 
 | |
| 		rkspi_enable_chip(regs, false);
 | |
| 		writel(todo - 1, ®s->ctrlr1);
 | |
| 		rkspi_enable_chip(regs, true);
 | |
| 
 | |
| 		toread = todo;
 | |
| 		towrite = todo;
 | |
| 		while (toread || towrite) {
 | |
| 			u32 status = readl(®s->sr);
 | |
| 
 | |
| 			if (towrite && !(status & SR_TF_FULL)) {
 | |
| 				writel(out ? *out++ : 0, regs->txdr);
 | |
| 				towrite--;
 | |
| 			}
 | |
| 			if (toread && !(status & SR_RF_EMPT)) {
 | |
| 				u32 byte = readl(regs->rxdr);
 | |
| 
 | |
| 				if (in)
 | |
| 					*in++ = byte;
 | |
| 				toread--;
 | |
| 			}
 | |
| 		}
 | |
| 		ret = rkspi_wait_till_not_busy(regs);
 | |
| 		if (ret)
 | |
| 			break;
 | |
| 		len -= todo;
 | |
| 	}
 | |
| 
 | |
| 	/* Deassert CS after transfer */
 | |
| 	if (flags & SPI_XFER_END)
 | |
| 		spi_cs_deactivate(dev, slave_plat->cs);
 | |
| 
 | |
| 	rkspi_enable_chip(regs, false);
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static int rockchip_spi_set_speed(struct udevice *bus, uint speed)
 | |
| {
 | |
| 	struct rockchip_spi_priv *priv = dev_get_priv(bus);
 | |
| 
 | |
| 	/* Clamp to the maximum frequency specified in the DTS */
 | |
| 	if (speed > priv->max_freq)
 | |
| 		speed = priv->max_freq;
 | |
| 
 | |
| 	priv->speed_hz = speed;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int rockchip_spi_set_mode(struct udevice *bus, uint mode)
 | |
| {
 | |
| 	struct rockchip_spi_priv *priv = dev_get_priv(bus);
 | |
| 
 | |
| 	priv->mode = mode;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static const struct dm_spi_ops rockchip_spi_ops = {
 | |
| 	.claim_bus	= rockchip_spi_claim_bus,
 | |
| 	.release_bus	= rockchip_spi_release_bus,
 | |
| 	.xfer		= rockchip_spi_xfer,
 | |
| 	.set_speed	= rockchip_spi_set_speed,
 | |
| 	.set_mode	= rockchip_spi_set_mode,
 | |
| 	/*
 | |
| 	 * cs_info is not needed, since we require all chip selects to be
 | |
| 	 * in the device tree explicitly
 | |
| 	 */
 | |
| };
 | |
| 
 | |
| static const struct udevice_id rockchip_spi_ids[] = {
 | |
| 	{ .compatible = "rockchip,rk3288-spi" },
 | |
| 	{ .compatible = "rockchip,rk3368-spi" },
 | |
| 	{ .compatible = "rockchip,rk3399-spi" },
 | |
| 	{ }
 | |
| };
 | |
| 
 | |
| U_BOOT_DRIVER(rockchip_spi) = {
 | |
| #if CONFIG_IS_ENABLED(OF_PLATDATA)
 | |
| 	.name	= "rockchip_rk3288_spi",
 | |
| #else
 | |
| 	.name	= "rockchip_spi",
 | |
| #endif
 | |
| 	.id	= UCLASS_SPI,
 | |
| 	.of_match = rockchip_spi_ids,
 | |
| 	.ops	= &rockchip_spi_ops,
 | |
| 	.ofdata_to_platdata = rockchip_spi_ofdata_to_platdata,
 | |
| 	.platdata_auto_alloc_size = sizeof(struct rockchip_spi_platdata),
 | |
| 	.priv_auto_alloc_size = sizeof(struct rockchip_spi_priv),
 | |
| 	.probe	= rockchip_spi_probe,
 | |
| };
 |