817 lines
		
	
	
		
			21 KiB
		
	
	
	
		
			C
		
	
	
	
			
		
		
	
	
			817 lines
		
	
	
		
			21 KiB
		
	
	
	
		
			C
		
	
	
	
| /*
 | |
|  * Copyright 2014-2015 Freescale Semiconductor, Inc.
 | |
|  * Layerscape PCIe driver
 | |
|  *
 | |
|  * SPDX-License-Identifier:	GPL-2.0+
 | |
|  */
 | |
| 
 | |
| #include <common.h>
 | |
| #include <asm/arch/fsl_serdes.h>
 | |
| #include <pci.h>
 | |
| #include <asm/io.h>
 | |
| #include <errno.h>
 | |
| #include <malloc.h>
 | |
| #ifndef CONFIG_LS102XA
 | |
| #include <asm/arch/fdt.h>
 | |
| #include <asm/arch/soc.h>
 | |
| #endif
 | |
| 
 | |
| #ifndef CONFIG_SYS_PCI_MEMORY_BUS
 | |
| #define CONFIG_SYS_PCI_MEMORY_BUS CONFIG_SYS_SDRAM_BASE
 | |
| #endif
 | |
| 
 | |
| #ifndef CONFIG_SYS_PCI_MEMORY_PHYS
 | |
| #define CONFIG_SYS_PCI_MEMORY_PHYS CONFIG_SYS_SDRAM_BASE
 | |
| #endif
 | |
| 
 | |
| #ifndef CONFIG_SYS_PCI_MEMORY_SIZE
 | |
| #define CONFIG_SYS_PCI_MEMORY_SIZE (2 * 1024 * 1024 * 1024UL) /* 2G */
 | |
| #endif
 | |
| 
 | |
| #ifndef CONFIG_SYS_PCI_EP_MEMORY_BASE
 | |
| #define CONFIG_SYS_PCI_EP_MEMORY_BASE CONFIG_SYS_LOAD_ADDR
 | |
| #endif
 | |
| 
 | |
| /* iATU registers */
 | |
| #define PCIE_ATU_VIEWPORT		0x900
 | |
| #define PCIE_ATU_REGION_INBOUND		(0x1 << 31)
 | |
| #define PCIE_ATU_REGION_OUTBOUND	(0x0 << 31)
 | |
| #define PCIE_ATU_REGION_INDEX0		(0x0 << 0)
 | |
| #define PCIE_ATU_REGION_INDEX1		(0x1 << 0)
 | |
| #define PCIE_ATU_REGION_INDEX2		(0x2 << 0)
 | |
| #define PCIE_ATU_REGION_INDEX3		(0x3 << 0)
 | |
| #define PCIE_ATU_CR1			0x904
 | |
| #define PCIE_ATU_TYPE_MEM		(0x0 << 0)
 | |
| #define PCIE_ATU_TYPE_IO		(0x2 << 0)
 | |
| #define PCIE_ATU_TYPE_CFG0		(0x4 << 0)
 | |
| #define PCIE_ATU_TYPE_CFG1		(0x5 << 0)
 | |
| #define PCIE_ATU_CR2			0x908
 | |
| #define PCIE_ATU_ENABLE			(0x1 << 31)
 | |
| #define PCIE_ATU_BAR_MODE_ENABLE	(0x1 << 30)
 | |
| #define PCIE_ATU_BAR_NUM(bar)		((bar) << 8)
 | |
| #define PCIE_ATU_LOWER_BASE		0x90C
 | |
| #define PCIE_ATU_UPPER_BASE		0x910
 | |
| #define PCIE_ATU_LIMIT			0x914
 | |
| #define PCIE_ATU_LOWER_TARGET		0x918
 | |
| #define PCIE_ATU_BUS(x)			(((x) & 0xff) << 24)
 | |
| #define PCIE_ATU_DEV(x)			(((x) & 0x1f) << 19)
 | |
| #define PCIE_ATU_FUNC(x)		(((x) & 0x7) << 16)
 | |
| #define PCIE_ATU_UPPER_TARGET		0x91C
 | |
| 
 | |
| #define PCIE_DBI_RO_WR_EN	0x8bc
 | |
| 
 | |
| #define PCIE_LINK_CAP		0x7c
 | |
| #define PCIE_LINK_SPEED_MASK	0xf
 | |
| #define PCIE_LINK_STA		0x82
 | |
| 
 | |
| #define LTSSM_STATE_MASK	0x3f
 | |
| #define LTSSM_PCIE_L0		0x11 /* L0 state */
 | |
| 
 | |
| #define PCIE_DBI_SIZE		0x100000 /* 1M */
 | |
| 
 | |
| #define PCIE_LCTRL0_CFG2_ENABLE	(1 << 31)
 | |
| #define PCIE_LCTRL0_VF(vf)	((vf) << 22)
 | |
| #define PCIE_LCTRL0_PF(pf)	((pf) << 16)
 | |
| #define PCIE_LCTRL0_VF_ACTIVE	(1 << 21)
 | |
| #define PCIE_LCTRL0_VAL(pf, vf)	(PCIE_LCTRL0_PF(pf) |			   \
 | |
| 				 PCIE_LCTRL0_VF(vf) |			   \
 | |
| 				 ((vf) == 0 ? 0 : PCIE_LCTRL0_VF_ACTIVE) | \
 | |
| 				 PCIE_LCTRL0_CFG2_ENABLE)
 | |
| 
 | |
| #define PCIE_NO_SRIOV_BAR_BASE	0x1000
 | |
| 
 | |
| #define PCIE_PF_NUM		2
 | |
| #define PCIE_VF_NUM		64
 | |
| 
 | |
| #define PCIE_BAR0_SIZE		(4 * 1024) /* 4K */
 | |
| #define PCIE_BAR1_SIZE		(8 * 1024) /* 8K for MSIX */
 | |
| #define PCIE_BAR2_SIZE		(4 * 1024) /* 4K */
 | |
| #define PCIE_BAR4_SIZE		(1 * 1024 * 1024) /* 1M */
 | |
| 
 | |
| struct ls_pcie {
 | |
| 	int idx;
 | |
| 	void __iomem *dbi;
 | |
| 	void __iomem *va_cfg0;
 | |
| 	void __iomem *va_cfg1;
 | |
| 	int next_lut_index;
 | |
| 	struct pci_controller hose;
 | |
| };
 | |
| 
 | |
| struct ls_pcie_info {
 | |
| 	unsigned long regs;
 | |
| 	int pci_num;
 | |
| 	u64 phys_base;
 | |
| 	u64 cfg0_phys;
 | |
| 	u64 cfg0_size;
 | |
| 	u64 cfg1_phys;
 | |
| 	u64 cfg1_size;
 | |
| 	u64 mem_bus;
 | |
| 	u64 mem_phys;
 | |
| 	u64 mem_size;
 | |
| 	u64 io_bus;
 | |
| 	u64 io_phys;
 | |
| 	u64 io_size;
 | |
| };
 | |
| 
 | |
| #define SET_LS_PCIE_INFO(x, num)			\
 | |
| {							\
 | |
| 	x.regs = CONFIG_SYS_PCIE##num##_ADDR;		\
 | |
| 	x.phys_base = CONFIG_SYS_PCIE##num##_PHYS_ADDR;	\
 | |
| 	x.cfg0_phys = CONFIG_SYS_PCIE_CFG0_PHYS_OFF +	\
 | |
| 		      CONFIG_SYS_PCIE##num##_PHYS_ADDR;	\
 | |
| 	x.cfg0_size = CONFIG_SYS_PCIE_CFG0_SIZE;	\
 | |
| 	x.cfg1_phys = CONFIG_SYS_PCIE_CFG1_PHYS_OFF +	\
 | |
| 		      CONFIG_SYS_PCIE##num##_PHYS_ADDR;	\
 | |
| 	x.cfg1_size = CONFIG_SYS_PCIE_CFG1_SIZE;	\
 | |
| 	x.mem_bus = CONFIG_SYS_PCIE_MEM_BUS;		\
 | |
| 	x.mem_phys = CONFIG_SYS_PCIE_MEM_PHYS_OFF +	\
 | |
| 		     CONFIG_SYS_PCIE##num##_PHYS_ADDR;	\
 | |
| 	x.mem_size = CONFIG_SYS_PCIE_MEM_SIZE;		\
 | |
| 	x.io_bus = CONFIG_SYS_PCIE_IO_BUS;		\
 | |
| 	x.io_phys = CONFIG_SYS_PCIE_IO_PHYS_OFF +	\
 | |
| 		    CONFIG_SYS_PCIE##num##_PHYS_ADDR;	\
 | |
| 	x.io_size = CONFIG_SYS_PCIE_IO_SIZE;		\
 | |
| 	x.pci_num = num;				\
 | |
| }
 | |
| 
 | |
| #ifdef CONFIG_LS102XA
 | |
| #include <asm/arch/immap_ls102xa.h>
 | |
| 
 | |
| /* PEX1/2 Misc Ports Status Register */
 | |
| #define LTSSM_STATE_SHIFT	20
 | |
| 
 | |
| static int ls_pcie_link_state(struct ls_pcie *pcie)
 | |
| {
 | |
| 	u32 state;
 | |
| 	struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
 | |
| 
 | |
| 	state = in_be32(&scfg->pexmscportsr[pcie->idx]);
 | |
| 	state = (state >> LTSSM_STATE_SHIFT) & LTSSM_STATE_MASK;
 | |
| 	if (state < LTSSM_PCIE_L0) {
 | |
| 		debug("....PCIe link error. LTSSM=0x%02x.\n", state);
 | |
| 		return 0;
 | |
| 	}
 | |
| 
 | |
| 	return 1;
 | |
| }
 | |
| #else
 | |
| static int ls_pcie_link_state(struct ls_pcie *pcie)
 | |
| {
 | |
| 	u32 state;
 | |
| 
 | |
| 	state = pex_lut_in32(pcie->dbi + PCIE_LUT_BASE + PCIE_LUT_DBG) &
 | |
| 		LTSSM_STATE_MASK;
 | |
| 	if (state < LTSSM_PCIE_L0) {
 | |
| 		debug("....PCIe link error. LTSSM=0x%02x.\n", state);
 | |
| 		return 0;
 | |
| 	}
 | |
| 
 | |
| 	return 1;
 | |
| }
 | |
| #endif
 | |
| 
 | |
| static int ls_pcie_link_up(struct ls_pcie *pcie)
 | |
| {
 | |
| 	int state;
 | |
| 	u32 cap;
 | |
| 
 | |
| 	state = ls_pcie_link_state(pcie);
 | |
| 	if (state)
 | |
| 		return state;
 | |
| 
 | |
| 	/* Try to download speed to gen1 */
 | |
| 	cap = readl(pcie->dbi + PCIE_LINK_CAP);
 | |
| 	writel((cap & (~PCIE_LINK_SPEED_MASK)) | 1, pcie->dbi + PCIE_LINK_CAP);
 | |
| 	/*
 | |
| 	 * Notice: the following delay has critical impact on link training
 | |
| 	 * if too short (<30ms) the link doesn't get up.
 | |
| 	 */
 | |
| 	mdelay(100);
 | |
| 	state = ls_pcie_link_state(pcie);
 | |
| 	if (state)
 | |
| 		return state;
 | |
| 
 | |
| 	writel(cap, pcie->dbi + PCIE_LINK_CAP);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static void ls_pcie_cfg0_set_busdev(struct ls_pcie *pcie, u32 busdev)
 | |
| {
 | |
| 	writel(PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX0,
 | |
| 	       pcie->dbi + PCIE_ATU_VIEWPORT);
 | |
| 	writel(busdev, pcie->dbi + PCIE_ATU_LOWER_TARGET);
 | |
| }
 | |
| 
 | |
| static void ls_pcie_cfg1_set_busdev(struct ls_pcie *pcie, u32 busdev)
 | |
| {
 | |
| 	writel(PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX1,
 | |
| 	       pcie->dbi + PCIE_ATU_VIEWPORT);
 | |
| 	writel(busdev, pcie->dbi + PCIE_ATU_LOWER_TARGET);
 | |
| }
 | |
| 
 | |
| static void ls_pcie_iatu_outbound_set(struct ls_pcie *pcie, int idx, int type,
 | |
| 				      u64 phys, u64 bus_addr, pci_size_t size)
 | |
| {
 | |
| 	writel(PCIE_ATU_REGION_OUTBOUND | idx, pcie->dbi + PCIE_ATU_VIEWPORT);
 | |
| 	writel((u32)phys, pcie->dbi + PCIE_ATU_LOWER_BASE);
 | |
| 	writel(phys >> 32, pcie->dbi + PCIE_ATU_UPPER_BASE);
 | |
| 	writel(phys + size - 1, pcie->dbi + PCIE_ATU_LIMIT);
 | |
| 	writel((u32)bus_addr, pcie->dbi + PCIE_ATU_LOWER_TARGET);
 | |
| 	writel(bus_addr >> 32, pcie->dbi + PCIE_ATU_UPPER_TARGET);
 | |
| 	writel(type, pcie->dbi + PCIE_ATU_CR1);
 | |
| 	writel(PCIE_ATU_ENABLE, pcie->dbi + PCIE_ATU_CR2);
 | |
| }
 | |
| 
 | |
| /* Use bar match mode and MEM type as default */
 | |
| static void ls_pcie_iatu_inbound_set(struct ls_pcie *pcie, int idx,
 | |
| 				     int bar, u64 phys)
 | |
| {
 | |
| 	writel(PCIE_ATU_REGION_INBOUND | idx, pcie->dbi + PCIE_ATU_VIEWPORT);
 | |
| 	writel((u32)phys, pcie->dbi + PCIE_ATU_LOWER_TARGET);
 | |
| 	writel(phys >> 32, pcie->dbi + PCIE_ATU_UPPER_TARGET);
 | |
| 	writel(PCIE_ATU_TYPE_MEM, pcie->dbi + PCIE_ATU_CR1);
 | |
| 	writel(PCIE_ATU_ENABLE | PCIE_ATU_BAR_MODE_ENABLE |
 | |
| 	       PCIE_ATU_BAR_NUM(bar), pcie->dbi + PCIE_ATU_CR2);
 | |
| }
 | |
| 
 | |
| static void ls_pcie_setup_atu(struct ls_pcie *pcie, struct ls_pcie_info *info)
 | |
| {
 | |
| #ifdef DEBUG
 | |
| 	int i;
 | |
| #endif
 | |
| 
 | |
| 	/* ATU 0 : OUTBOUND : CFG0 */
 | |
| 	ls_pcie_iatu_outbound_set(pcie, PCIE_ATU_REGION_INDEX0,
 | |
| 				  PCIE_ATU_TYPE_CFG0,
 | |
| 				  info->cfg0_phys,
 | |
| 				  0,
 | |
| 				  info->cfg0_size);
 | |
| 	/* ATU 1 : OUTBOUND : CFG1 */
 | |
| 	ls_pcie_iatu_outbound_set(pcie, PCIE_ATU_REGION_INDEX1,
 | |
| 				  PCIE_ATU_TYPE_CFG1,
 | |
| 				  info->cfg1_phys,
 | |
| 				  0,
 | |
| 				  info->cfg1_size);
 | |
| 	/* ATU 2 : OUTBOUND : MEM */
 | |
| 	ls_pcie_iatu_outbound_set(pcie, PCIE_ATU_REGION_INDEX2,
 | |
| 				  PCIE_ATU_TYPE_MEM,
 | |
| 				  info->mem_phys,
 | |
| 				  info->mem_bus,
 | |
| 				  info->mem_size);
 | |
| 	/* ATU 3 : OUTBOUND : IO */
 | |
| 	ls_pcie_iatu_outbound_set(pcie, PCIE_ATU_REGION_INDEX3,
 | |
| 				  PCIE_ATU_TYPE_IO,
 | |
| 				  info->io_phys,
 | |
| 				  info->io_bus,
 | |
| 				  info->io_size);
 | |
| 
 | |
| #ifdef DEBUG
 | |
| 	for (i = 0; i <= PCIE_ATU_REGION_INDEX3; i++) {
 | |
| 		writel(PCIE_ATU_REGION_OUTBOUND | i,
 | |
| 		       pcie->dbi + PCIE_ATU_VIEWPORT);
 | |
| 		debug("iATU%d:\n", i);
 | |
| 		debug("\tLOWER PHYS 0x%08x\n",
 | |
| 		      readl(pcie->dbi + PCIE_ATU_LOWER_BASE));
 | |
| 		debug("\tUPPER PHYS 0x%08x\n",
 | |
| 		      readl(pcie->dbi + PCIE_ATU_UPPER_BASE));
 | |
| 		debug("\tLOWER BUS  0x%08x\n",
 | |
| 		      readl(pcie->dbi + PCIE_ATU_LOWER_TARGET));
 | |
| 		debug("\tUPPER BUS  0x%08x\n",
 | |
| 		      readl(pcie->dbi + PCIE_ATU_UPPER_TARGET));
 | |
| 		debug("\tLIMIT      0x%08x\n",
 | |
| 		      readl(pcie->dbi + PCIE_ATU_LIMIT));
 | |
| 		debug("\tCR1        0x%08x\n",
 | |
| 		      readl(pcie->dbi + PCIE_ATU_CR1));
 | |
| 		debug("\tCR2        0x%08x\n",
 | |
| 		      readl(pcie->dbi + PCIE_ATU_CR2));
 | |
| 	}
 | |
| #endif
 | |
| }
 | |
| 
 | |
| int pci_skip_dev(struct pci_controller *hose, pci_dev_t dev)
 | |
| {
 | |
| 	/* Do not skip controller */
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int ls_pcie_addr_valid(struct pci_controller *hose, pci_dev_t d)
 | |
| {
 | |
| 	if (PCI_DEV(d) > 0)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	/* Controller does not support multi-function in RC mode */
 | |
| 	if ((PCI_BUS(d) == hose->first_busno) && (PCI_FUNC(d) > 0))
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int ls_pcie_read_config(struct pci_controller *hose, pci_dev_t d,
 | |
| 			       int where, u32 *val)
 | |
| {
 | |
| 	struct ls_pcie *pcie = hose->priv_data;
 | |
| 	u32 busdev, *addr;
 | |
| 
 | |
| 	if (ls_pcie_addr_valid(hose, d)) {
 | |
| 		*val = 0xffffffff;
 | |
| 		return 0;
 | |
| 	}
 | |
| 
 | |
| 	if (PCI_BUS(d) == hose->first_busno) {
 | |
| 		addr = pcie->dbi + (where & ~0x3);
 | |
| 	} else {
 | |
| 		busdev = PCIE_ATU_BUS(PCI_BUS(d)) |
 | |
| 			 PCIE_ATU_DEV(PCI_DEV(d)) |
 | |
| 			 PCIE_ATU_FUNC(PCI_FUNC(d));
 | |
| 
 | |
| 		if (PCI_BUS(d) == hose->first_busno + 1) {
 | |
| 			ls_pcie_cfg0_set_busdev(pcie, busdev);
 | |
| 			addr = pcie->va_cfg0 + (where & ~0x3);
 | |
| 		} else {
 | |
| 			ls_pcie_cfg1_set_busdev(pcie, busdev);
 | |
| 			addr = pcie->va_cfg1 + (where & ~0x3);
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	*val = readl(addr);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int ls_pcie_write_config(struct pci_controller *hose, pci_dev_t d,
 | |
| 				int where, u32 val)
 | |
| {
 | |
| 	struct ls_pcie *pcie = hose->priv_data;
 | |
| 	u32 busdev, *addr;
 | |
| 
 | |
| 	if (ls_pcie_addr_valid(hose, d))
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	if (PCI_BUS(d) == hose->first_busno) {
 | |
| 		addr = pcie->dbi + (where & ~0x3);
 | |
| 	} else {
 | |
| 		busdev = PCIE_ATU_BUS(PCI_BUS(d)) |
 | |
| 			 PCIE_ATU_DEV(PCI_DEV(d)) |
 | |
| 			 PCIE_ATU_FUNC(PCI_FUNC(d));
 | |
| 
 | |
| 		if (PCI_BUS(d) == hose->first_busno + 1) {
 | |
| 			ls_pcie_cfg0_set_busdev(pcie, busdev);
 | |
| 			addr = pcie->va_cfg0 + (where & ~0x3);
 | |
| 		} else {
 | |
| 			ls_pcie_cfg1_set_busdev(pcie, busdev);
 | |
| 			addr = pcie->va_cfg1 + (where & ~0x3);
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	writel(val, addr);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static void ls_pcie_setup_ctrl(struct ls_pcie *pcie,
 | |
| 			       struct ls_pcie_info *info)
 | |
| {
 | |
| 	struct pci_controller *hose = &pcie->hose;
 | |
| 	pci_dev_t dev = PCI_BDF(hose->first_busno, 0, 0);
 | |
| 
 | |
| 	ls_pcie_setup_atu(pcie, info);
 | |
| 
 | |
| 	pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_0, 0);
 | |
| 
 | |
| 	/* program correct class for RC */
 | |
| 	writel(1, pcie->dbi + PCIE_DBI_RO_WR_EN);
 | |
| 	pci_hose_write_config_word(hose, dev, PCI_CLASS_DEVICE,
 | |
| 				   PCI_CLASS_BRIDGE_PCI);
 | |
| #ifndef CONFIG_LS102XA
 | |
| 	writel(0, pcie->dbi + PCIE_DBI_RO_WR_EN);
 | |
| #endif
 | |
| }
 | |
| 
 | |
| static void ls_pcie_ep_setup_atu(struct ls_pcie *pcie,
 | |
| 				 struct ls_pcie_info *info)
 | |
| {
 | |
| 	u64 phys = CONFIG_SYS_PCI_EP_MEMORY_BASE;
 | |
| 
 | |
| 	/* ATU 0 : INBOUND : map BAR0 */
 | |
| 	ls_pcie_iatu_inbound_set(pcie, PCIE_ATU_REGION_INDEX0, 0, phys);
 | |
| 	/* ATU 1 : INBOUND : map BAR1 */
 | |
| 	phys += PCIE_BAR1_SIZE;
 | |
| 	ls_pcie_iatu_inbound_set(pcie, PCIE_ATU_REGION_INDEX1, 1, phys);
 | |
| 	/* ATU 2 : INBOUND : map BAR2 */
 | |
| 	phys += PCIE_BAR2_SIZE;
 | |
| 	ls_pcie_iatu_inbound_set(pcie, PCIE_ATU_REGION_INDEX2, 2, phys);
 | |
| 	/* ATU 3 : INBOUND : map BAR4 */
 | |
| 	phys = CONFIG_SYS_PCI_EP_MEMORY_BASE + PCIE_BAR4_SIZE;
 | |
| 	ls_pcie_iatu_inbound_set(pcie, PCIE_ATU_REGION_INDEX3, 4, phys);
 | |
| 
 | |
| 	/* ATU 0 : OUTBOUND : map 4G MEM */
 | |
| 	ls_pcie_iatu_outbound_set(pcie, PCIE_ATU_REGION_INDEX0,
 | |
| 				  PCIE_ATU_TYPE_MEM,
 | |
| 				  info->phys_base,
 | |
| 				  0,
 | |
| 				  4 * 1024 * 1024 * 1024ULL);
 | |
| }
 | |
| 
 | |
| /* BAR0 and BAR1 are 32bit BAR2 and BAR4 are 64bit */
 | |
| static void ls_pcie_ep_setup_bar(void *bar_base, int bar, u32 size)
 | |
| {
 | |
| 	if (size < 4 * 1024)
 | |
| 		return;
 | |
| 
 | |
| 	switch (bar) {
 | |
| 	case 0:
 | |
| 		writel(size - 1, bar_base + PCI_BASE_ADDRESS_0);
 | |
| 		break;
 | |
| 	case 1:
 | |
| 		writel(size - 1, bar_base + PCI_BASE_ADDRESS_1);
 | |
| 		break;
 | |
| 	case 2:
 | |
| 		writel(size - 1, bar_base + PCI_BASE_ADDRESS_2);
 | |
| 		writel(0, bar_base + PCI_BASE_ADDRESS_3);
 | |
| 		break;
 | |
| 	case 4:
 | |
| 		writel(size - 1, bar_base + PCI_BASE_ADDRESS_4);
 | |
| 		writel(0, bar_base + PCI_BASE_ADDRESS_5);
 | |
| 		break;
 | |
| 	default:
 | |
| 		break;
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static void ls_pcie_ep_setup_bars(void *bar_base)
 | |
| {
 | |
| 	/* BAR0 - 32bit - 4K configuration */
 | |
| 	ls_pcie_ep_setup_bar(bar_base, 0, PCIE_BAR0_SIZE);
 | |
| 	/* BAR1 - 32bit - 8K MSIX*/
 | |
| 	ls_pcie_ep_setup_bar(bar_base, 1, PCIE_BAR1_SIZE);
 | |
| 	/* BAR2 - 64bit - 4K MEM desciptor */
 | |
| 	ls_pcie_ep_setup_bar(bar_base, 2, PCIE_BAR2_SIZE);
 | |
| 	/* BAR4 - 64bit - 1M MEM*/
 | |
| 	ls_pcie_ep_setup_bar(bar_base, 4, PCIE_BAR4_SIZE);
 | |
| }
 | |
| 
 | |
| static void ls_pcie_setup_ep(struct ls_pcie *pcie, struct ls_pcie_info *info)
 | |
| {
 | |
| 	struct pci_controller *hose = &pcie->hose;
 | |
| 	pci_dev_t dev = PCI_BDF(hose->first_busno, 0, 0);
 | |
| 	int sriov;
 | |
| 
 | |
| 	sriov = pci_hose_find_ext_capability(hose, dev, PCI_EXT_CAP_ID_SRIOV);
 | |
| 	if (sriov) {
 | |
| 		int pf, vf;
 | |
| 
 | |
| 		for (pf = 0; pf < PCIE_PF_NUM; pf++) {
 | |
| 			for (vf = 0; vf <= PCIE_VF_NUM; vf++) {
 | |
| #ifndef CONFIG_LS102XA
 | |
| 				writel(PCIE_LCTRL0_VAL(pf, vf),
 | |
| 				       pcie->dbi + PCIE_LUT_BASE +
 | |
| 				       PCIE_LUT_LCTRL0);
 | |
| #endif
 | |
| 				ls_pcie_ep_setup_bars(pcie->dbi);
 | |
| 				ls_pcie_ep_setup_atu(pcie, info);
 | |
| 			}
 | |
| 		}
 | |
| 
 | |
| 		/* Disable CFG2 */
 | |
| #ifndef CONFIG_LS102XA
 | |
| 		writel(0, pcie->dbi + PCIE_LUT_BASE + PCIE_LUT_LCTRL0);
 | |
| #endif
 | |
| 	} else {
 | |
| 		ls_pcie_ep_setup_bars(pcie->dbi + PCIE_NO_SRIOV_BAR_BASE);
 | |
| 		ls_pcie_ep_setup_atu(pcie, info);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| #ifdef CONFIG_FSL_LSCH3
 | |
| /*
 | |
|  * Return next available LUT index.
 | |
|  */
 | |
| static int ls_pcie_next_lut_index(struct ls_pcie *pcie)
 | |
| {
 | |
| 	if (pcie->next_lut_index < PCIE_LUT_ENTRY_COUNT)
 | |
| 		return pcie->next_lut_index++;
 | |
| 	else
 | |
| 		return -1;  /* LUT is full */
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Program a single LUT entry
 | |
|  */
 | |
| static void ls_pcie_lut_set_mapping(struct ls_pcie *pcie, int index, u32 devid,
 | |
| 			     u32 streamid)
 | |
| {
 | |
| 	void __iomem *lut;
 | |
| 
 | |
| 	lut = pcie->dbi + PCIE_LUT_BASE;
 | |
| 
 | |
| 	/* leave mask as all zeroes, want to match all bits */
 | |
| 	writel((devid << 16), lut + PCIE_LUT_UDR(index));
 | |
| 	writel(streamid | PCIE_LUT_ENABLE, lut + PCIE_LUT_LDR(index));
 | |
| }
 | |
| 
 | |
| /* returns the next available streamid */
 | |
| static u32 ls_pcie_next_streamid(void)
 | |
| {
 | |
| 	static int next_stream_id = FSL_PEX_STREAM_ID_START;
 | |
| 
 | |
| 	if (next_stream_id > FSL_PEX_STREAM_ID_END)
 | |
| 		return 0xffffffff;
 | |
| 
 | |
| 	return next_stream_id++;
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * An msi-map is a property to be added to the pci controller
 | |
|  * node.  It is a table, where each entry consists of 4 fields
 | |
|  * e.g.:
 | |
|  *
 | |
|  *      msi-map = <[devid] [phandle-to-msi-ctrl] [stream-id] [count]
 | |
|  *                 [devid] [phandle-to-msi-ctrl] [stream-id] [count]>;
 | |
|  */
 | |
| static void fdt_pcie_set_msi_map_entry(void *blob, struct ls_pcie *pcie,
 | |
| 				       u32 devid, u32 streamid)
 | |
| {
 | |
| 	char pcie_path[19];
 | |
| 	u32 *prop;
 | |
| 	u32 phandle;
 | |
| 	int nodeoffset;
 | |
| 
 | |
| 	/* find pci controller node */
 | |
| 	snprintf(pcie_path, sizeof(pcie_path), "/soc/pcie@%llx",
 | |
| 		 (u64)pcie->dbi);
 | |
| 	nodeoffset = fdt_path_offset(blob, pcie_path);
 | |
| 	if (nodeoffset < 0) {
 | |
| 		printf("\n%s: ERROR: unable to update PCIe node: %s\n",
 | |
| 		       __func__, pcie_path);
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	/* get phandle to MSI controller */
 | |
| 	prop = (u32 *)fdt_getprop(blob, nodeoffset, "msi-parent", 0);
 | |
| 	if (prop == NULL) {
 | |
| 		printf("\n%s: ERROR: missing msi-parent: %s\n", __func__,
 | |
| 		       pcie_path);
 | |
| 		return;
 | |
| 	}
 | |
| 	phandle = be32_to_cpu(*prop);
 | |
| 
 | |
| 	/* set one msi-map row */
 | |
| 	fdt_appendprop_u32(blob, nodeoffset, "msi-map", devid);
 | |
| 	fdt_appendprop_u32(blob, nodeoffset, "msi-map", phandle);
 | |
| 	fdt_appendprop_u32(blob, nodeoffset, "msi-map", streamid);
 | |
| 	fdt_appendprop_u32(blob, nodeoffset, "msi-map", 1);
 | |
| }
 | |
| 
 | |
| static void fdt_fixup_pcie(void *blob)
 | |
| {
 | |
| 	unsigned int found_multi = 0;
 | |
| 	unsigned char header_type;
 | |
| 	int index;
 | |
| 	u32 streamid;
 | |
| 	pci_dev_t dev, bdf;
 | |
| 	int bus;
 | |
| 	unsigned short id;
 | |
| 	struct pci_controller *hose;
 | |
| 	struct ls_pcie *pcie;
 | |
| 	int i;
 | |
| 
 | |
| 	for (i = 0, hose = pci_get_hose_head(); hose; hose = hose->next, i++) {
 | |
| 		pcie = hose->priv_data;
 | |
| 		for (bus = hose->first_busno; bus <= hose->last_busno; bus++) {
 | |
| 
 | |
| 			for (dev =  PCI_BDF(bus, 0, 0);
 | |
| 			     dev <  PCI_BDF(bus, PCI_MAX_PCI_DEVICES - 1,
 | |
| 					    PCI_MAX_PCI_FUNCTIONS - 1);
 | |
| 			     dev += PCI_BDF(0, 0, 1)) {
 | |
| 
 | |
| 				if (PCI_FUNC(dev) && !found_multi)
 | |
| 					continue;
 | |
| 
 | |
| 				pci_read_config_word(dev, PCI_VENDOR_ID, &id);
 | |
| 
 | |
| 				pci_read_config_byte(dev, PCI_HEADER_TYPE,
 | |
| 						     &header_type);
 | |
| 
 | |
| 				if ((id == 0xFFFF) || (id == 0x0000))
 | |
| 					continue;
 | |
| 
 | |
| 				if (!PCI_FUNC(dev))
 | |
| 					found_multi = header_type & 0x80;
 | |
| 
 | |
| 				streamid = ls_pcie_next_streamid();
 | |
| 				if (streamid == 0xffffffff) {
 | |
| 					printf("ERROR: no stream ids free\n");
 | |
| 					continue;
 | |
| 				}
 | |
| 
 | |
| 				index = ls_pcie_next_lut_index(pcie);
 | |
| 				if (index < 0) {
 | |
| 					printf("ERROR: no LUT indexes free\n");
 | |
| 					continue;
 | |
| 				}
 | |
| 
 | |
| 				/* the DT fixup must be relative to the hose first_busno */
 | |
| 				bdf = dev - PCI_BDF(hose->first_busno, 0, 0);
 | |
| 
 | |
| 				/* map PCI b.d.f to streamID in LUT */
 | |
| 				ls_pcie_lut_set_mapping(pcie, index, bdf >> 8,
 | |
| 							streamid);
 | |
| 
 | |
| 				/* update msi-map in device tree */
 | |
| 				fdt_pcie_set_msi_map_entry(blob, pcie, bdf >> 8,
 | |
| 							   streamid);
 | |
| 			}
 | |
| 		}
 | |
| 	}
 | |
| }
 | |
| #endif
 | |
| 
 | |
| int ls_pcie_init_ctrl(int busno, enum srds_prtcl dev, struct ls_pcie_info *info)
 | |
| {
 | |
| 	struct ls_pcie *pcie;
 | |
| 	struct pci_controller *hose;
 | |
| 	int num = dev - PCIE1;
 | |
| 	pci_dev_t pdev = PCI_BDF(busno, 0, 0);
 | |
| 	int i, linkup, ep_mode;
 | |
| 	u8 header_type;
 | |
| 	u16 temp16;
 | |
| 
 | |
| 	if (!is_serdes_configured(dev)) {
 | |
| 		printf("PCIe%d: disabled\n", num + 1);
 | |
| 		return busno;
 | |
| 	}
 | |
| 
 | |
| 	pcie = malloc(sizeof(*pcie));
 | |
| 	if (!pcie)
 | |
| 		return busno;
 | |
| 	memset(pcie, 0, sizeof(*pcie));
 | |
| 
 | |
| 	hose = &pcie->hose;
 | |
| 	hose->priv_data = pcie;
 | |
| 	hose->first_busno = busno;
 | |
| 	pcie->idx = num;
 | |
| 	pcie->dbi = map_physmem(info->regs, PCIE_DBI_SIZE, MAP_NOCACHE);
 | |
| 	pcie->va_cfg0 = map_physmem(info->cfg0_phys,
 | |
| 				    info->cfg0_size,
 | |
| 				    MAP_NOCACHE);
 | |
| 	pcie->va_cfg1 = map_physmem(info->cfg1_phys,
 | |
| 				    info->cfg1_size,
 | |
| 				    MAP_NOCACHE);
 | |
| 	pcie->next_lut_index = 0;
 | |
| 
 | |
| 	/* outbound memory */
 | |
| 	pci_set_region(&hose->regions[0],
 | |
| 		       (pci_size_t)info->mem_bus,
 | |
| 		       (phys_size_t)info->mem_phys,
 | |
| 		       (pci_size_t)info->mem_size,
 | |
| 		       PCI_REGION_MEM);
 | |
| 
 | |
| 	/* outbound io */
 | |
| 	pci_set_region(&hose->regions[1],
 | |
| 		       (pci_size_t)info->io_bus,
 | |
| 		       (phys_size_t)info->io_phys,
 | |
| 		       (pci_size_t)info->io_size,
 | |
| 		       PCI_REGION_IO);
 | |
| 
 | |
| 	/* System memory space */
 | |
| 	pci_set_region(&hose->regions[2],
 | |
| 		       CONFIG_SYS_PCI_MEMORY_BUS,
 | |
| 		       CONFIG_SYS_PCI_MEMORY_PHYS,
 | |
| 		       CONFIG_SYS_PCI_MEMORY_SIZE,
 | |
| 		       PCI_REGION_SYS_MEMORY);
 | |
| 
 | |
| 	hose->region_count = 3;
 | |
| 
 | |
| 	for (i = 0; i < hose->region_count; i++)
 | |
| 		debug("PCI reg:%d %016llx:%016llx %016llx %08lx\n",
 | |
| 		      i,
 | |
| 		      (u64)hose->regions[i].phys_start,
 | |
| 		      (u64)hose->regions[i].bus_start,
 | |
| 		      (u64)hose->regions[i].size,
 | |
| 		      hose->regions[i].flags);
 | |
| 
 | |
| 	pci_set_ops(hose,
 | |
| 		    pci_hose_read_config_byte_via_dword,
 | |
| 		    pci_hose_read_config_word_via_dword,
 | |
| 		    ls_pcie_read_config,
 | |
| 		    pci_hose_write_config_byte_via_dword,
 | |
| 		    pci_hose_write_config_word_via_dword,
 | |
| 		    ls_pcie_write_config);
 | |
| 
 | |
| 	pci_hose_read_config_byte(hose, pdev, PCI_HEADER_TYPE, &header_type);
 | |
| 	ep_mode = (header_type & 0x7f) == PCI_HEADER_TYPE_NORMAL;
 | |
| 	printf("PCIe%u: %s ", info->pci_num,
 | |
| 	       ep_mode ? "Endpoint" : "Root Complex");
 | |
| 
 | |
| 	if (ep_mode)
 | |
| 		ls_pcie_setup_ep(pcie, info);
 | |
| 	else
 | |
| 		ls_pcie_setup_ctrl(pcie, info);
 | |
| 
 | |
| 	linkup = ls_pcie_link_up(pcie);
 | |
| 
 | |
| 	if (!linkup) {
 | |
| 		/* Let the user know there's no PCIe link */
 | |
| 		printf("no link, regs @ 0x%lx\n", info->regs);
 | |
| 		hose->last_busno = hose->first_busno;
 | |
| 		return busno;
 | |
| 	}
 | |
| 
 | |
| 	/* Print the negotiated PCIe link width */
 | |
| 	pci_hose_read_config_word(hose, pdev, PCIE_LINK_STA, &temp16);
 | |
| 	printf("x%d gen%d, regs @ 0x%lx\n", (temp16 & 0x3f0) >> 4,
 | |
| 	       (temp16 & 0xf), info->regs);
 | |
| 
 | |
| 	if (ep_mode)
 | |
| 		return busno;
 | |
| 
 | |
| 	pci_register_hose(hose);
 | |
| 
 | |
| 	hose->last_busno = pci_hose_scan(hose);
 | |
| 
 | |
| 	printf("PCIe%x: Bus %02x - %02x\n",
 | |
| 	       info->pci_num, hose->first_busno, hose->last_busno);
 | |
| 
 | |
| 	return hose->last_busno + 1;
 | |
| }
 | |
| 
 | |
| int ls_pcie_init_board(int busno)
 | |
| {
 | |
| 	struct ls_pcie_info info;
 | |
| 
 | |
| #ifdef CONFIG_PCIE1
 | |
| 	SET_LS_PCIE_INFO(info, 1);
 | |
| 	busno = ls_pcie_init_ctrl(busno, PCIE1, &info);
 | |
| #endif
 | |
| 
 | |
| #ifdef CONFIG_PCIE2
 | |
| 	SET_LS_PCIE_INFO(info, 2);
 | |
| 	busno = ls_pcie_init_ctrl(busno, PCIE2, &info);
 | |
| #endif
 | |
| 
 | |
| #ifdef CONFIG_PCIE3
 | |
| 	SET_LS_PCIE_INFO(info, 3);
 | |
| 	busno = ls_pcie_init_ctrl(busno, PCIE3, &info);
 | |
| #endif
 | |
| 
 | |
| #ifdef CONFIG_PCIE4
 | |
| 	SET_LS_PCIE_INFO(info, 4);
 | |
| 	busno = ls_pcie_init_ctrl(busno, PCIE4, &info);
 | |
| #endif
 | |
| 
 | |
| 	return busno;
 | |
| }
 | |
| 
 | |
| void pci_init_board(void)
 | |
| {
 | |
| 	ls_pcie_init_board(0);
 | |
| }
 | |
| 
 | |
| #ifdef CONFIG_OF_BOARD_SETUP
 | |
| #include <libfdt.h>
 | |
| #include <fdt_support.h>
 | |
| 
 | |
| static void ft_pcie_ls_setup(void *blob, const char *pci_compat,
 | |
| 			     unsigned long ctrl_addr, enum srds_prtcl dev)
 | |
| {
 | |
| 	int off;
 | |
| 
 | |
| 	off = fdt_node_offset_by_compat_reg(blob, pci_compat,
 | |
| 					    (phys_addr_t)ctrl_addr);
 | |
| 	if (off < 0)
 | |
| 		return;
 | |
| 
 | |
| 	if (!is_serdes_configured(dev))
 | |
| 		fdt_set_node_status(blob, off, FDT_STATUS_DISABLED, 0);
 | |
| }
 | |
| 
 | |
| void ft_pci_setup(void *blob, bd_t *bd)
 | |
| {
 | |
| 	#ifdef CONFIG_PCIE1
 | |
| 	ft_pcie_ls_setup(blob, FSL_PCIE_COMPAT, CONFIG_SYS_PCIE1_ADDR, PCIE1);
 | |
| 	#endif
 | |
| 
 | |
| 	#ifdef CONFIG_PCIE2
 | |
| 	ft_pcie_ls_setup(blob, FSL_PCIE_COMPAT, CONFIG_SYS_PCIE2_ADDR, PCIE2);
 | |
| 	#endif
 | |
| 
 | |
| 	#ifdef CONFIG_PCIE3
 | |
| 	ft_pcie_ls_setup(blob, FSL_PCIE_COMPAT, CONFIG_SYS_PCIE3_ADDR, PCIE3);
 | |
| 	#endif
 | |
| 
 | |
| 	#ifdef CONFIG_PCIE4
 | |
| 	ft_pcie_ls_setup(blob, FSL_PCIE_COMPAT, CONFIG_SYS_PCIE4_ADDR, PCIE4);
 | |
| 	#endif
 | |
| 
 | |
| 	#ifdef CONFIG_FSL_LSCH3
 | |
| 	fdt_fixup_pcie(blob);
 | |
| 	#endif
 | |
| }
 | |
| 
 | |
| #else
 | |
| void ft_pci_setup(void *blob, bd_t *bd)
 | |
| {
 | |
| }
 | |
| #endif
 |