88 lines
3.4 KiB
Plaintext
88 lines
3.4 KiB
Plaintext
config CMD_STBOARD
|
|
bool "stboard - command for OTP board information"
|
|
depends on ARCH_STM32MP
|
|
default y if TARGET_ST_STM32MP15x
|
|
help
|
|
This compile the stboard command to
|
|
read and write the board in the OTP.
|
|
|
|
config MTDPARTS_NAND0_BOOT
|
|
string "mtd boot partitions for nand0"
|
|
default "2m(fsbl),2m(ssbl1),2m(ssbl2)" if STM32MP15x_STM32IMAGE || \
|
|
!TFABOOT
|
|
default "2m(fsbl),4m(fip1),4m(fip2)"
|
|
depends on SYS_MTDPARTS_RUNTIME && ARCH_STM32MP
|
|
help
|
|
This define the partitions of nand0 used to build mtparts dynamically
|
|
for boot from nand0.
|
|
Each partition need to be aligned with the device erase block size,
|
|
512KB is the max size for the NAND supported by stm32mp1 platform.
|
|
The fsbl partition support multiple copy of the same binary, one by
|
|
erase block.
|
|
|
|
config MTDPARTS_NAND0_TEE
|
|
string "mtd tee partitions for nand0"
|
|
default "512k(teeh),512k(teed),512k(teex)"
|
|
depends on SYS_MTDPARTS_RUNTIME && ARCH_STM32MP && STM32MP15x_STM32IMAGE
|
|
help
|
|
This define the tee partitions added in mtparts dynamically
|
|
when tee is supported with boot from nand0.
|
|
Each partition need to be aligned with the device erase block size,
|
|
512KB is the max size for the NAND supported by stm32mp1 platform.
|
|
|
|
config MTDPARTS_NOR0_BOOT
|
|
string "mtd boot partitions for nor0"
|
|
default "256k(fsbl1),256k(fsbl2),2m(ssbl),512k(u-boot-env)" if STM32MP15x_STM32IMAGE || \
|
|
!TFABOOT
|
|
default "256k(fsbl1),256k(fsbl2),4m(fip),512k(u-boot-env)"
|
|
depends on SYS_MTDPARTS_RUNTIME && ARCH_STM32MP
|
|
help
|
|
This define the partitions of nand0 used to build mtparts dynamically
|
|
for boot from nor0.
|
|
Each partition need to be aligned with the device erase block size,
|
|
with 256KB we support all the NOR.
|
|
U-Boot env partition (512kB) use 2 erase block for redundancy.
|
|
|
|
config MTDPARTS_NOR0_TEE
|
|
string "mtd tee partitions for nor0"
|
|
default "256k(teeh),512k(teed),256k(teex)"
|
|
depends on SYS_MTDPARTS_RUNTIME && ARCH_STM32MP && STM32MP15x_STM32IMAGE
|
|
help
|
|
This define the tee partitions added in mtparts dynamically
|
|
when tee is supported with boot from nor0.
|
|
|
|
config MTDPARTS_SPINAND0_BOOT
|
|
string "mtd boot partitions for spi-nand0"
|
|
default "2m(fsbl),2m(ssbl1),2m(ssbl2)" if STM32MP15x_STM32IMAGE || !TFABOOT
|
|
default "2m(fsbl),4m(fip1),4m(fip2)"
|
|
depends on SYS_MTDPARTS_RUNTIME && ARCH_STM32MP
|
|
help
|
|
This define the partitions of nand0 used to build mtparts dynamically
|
|
for boot from spi-nand0,
|
|
512KB is the max size for the NAND supported by stm32mp1 platform.
|
|
The fsbl partition support multiple copy of the same binary, one by
|
|
erase block.
|
|
|
|
config MTDPARTS_SPINAND0_TEE
|
|
string "mtd tee partitions for spi-nand0"
|
|
default "512k(teeh),512k(teed),512k(teex)"
|
|
depends on SYS_MTDPARTS_RUNTIME && ARCH_STM32MP && STM32MP15x_STM32IMAGE
|
|
help
|
|
This define the tee partitions added in mtparts dynamically
|
|
when tee is supported with boot from spi-nand0,
|
|
512KB is the max size for the NAND supported by stm32mp1 platform.
|
|
|
|
config DFU_ALT_RAM0
|
|
string "dfu for ram0"
|
|
default "uImage ram 0xc2000000 0x2000000;devicetree.dtb ram 0xc4000000 0x100000;uramdisk.image.gz ram 0xc4400000 0x10000000"
|
|
depends on ARCH_STM32MP && SET_DFU_ALT_INFO
|
|
help
|
|
This defines the partitions of ram used to build dfu dynamically.
|
|
|
|
config TYPEC_STUSB160X
|
|
tristate "STMicroelectronics STUSB160X Type-C controller driver"
|
|
depends on DM_I2C
|
|
help
|
|
Say Y if your system has STMicroelectronics STUSB160X Type-C port
|
|
controller.
|