542 lines
		
	
	
		
			14 KiB
		
	
	
	
		
			C
		
	
	
	
			
		
		
	
	
			542 lines
		
	
	
		
			14 KiB
		
	
	
	
		
			C
		
	
	
	
| // SPDX-License-Identifier: GPL-2.0
 | |
| /*
 | |
|  * PCIe driver for Marvell MVEBU SoCs
 | |
|  *
 | |
|  * Based on Barebox drivers/pci/pci-mvebu.c
 | |
|  *
 | |
|  * Ported to U-Boot by:
 | |
|  * Anton Schubert <anton.schubert@gmx.de>
 | |
|  * Stefan Roese <sr@denx.de>
 | |
|  */
 | |
| 
 | |
| #include <common.h>
 | |
| #include <dm.h>
 | |
| #include <log.h>
 | |
| #include <malloc.h>
 | |
| #include <asm/global_data.h>
 | |
| #include <dm/device-internal.h>
 | |
| #include <dm/lists.h>
 | |
| #include <dm/of_access.h>
 | |
| #include <pci.h>
 | |
| #include <asm/io.h>
 | |
| #include <asm/arch/cpu.h>
 | |
| #include <asm/arch/soc.h>
 | |
| #include <linux/bitops.h>
 | |
| #include <linux/errno.h>
 | |
| #include <linux/ioport.h>
 | |
| #include <linux/mbus.h>
 | |
| 
 | |
| DECLARE_GLOBAL_DATA_PTR;
 | |
| 
 | |
| /* PCIe unit register offsets */
 | |
| #define SELECT(x, n)			((x >> n) & 1UL)
 | |
| 
 | |
| #define PCIE_DEV_ID_OFF			0x0000
 | |
| #define PCIE_CMD_OFF			0x0004
 | |
| #define PCIE_DEV_REV_OFF		0x0008
 | |
| #define  PCIE_BAR_LO_OFF(n)		(0x0010 + ((n) << 3))
 | |
| #define  PCIE_BAR_HI_OFF(n)		(0x0014 + ((n) << 3))
 | |
| #define PCIE_CAPAB_OFF			0x0060
 | |
| #define PCIE_CTRL_STAT_OFF		0x0068
 | |
| #define PCIE_HEADER_LOG_4_OFF		0x0128
 | |
| #define  PCIE_BAR_CTRL_OFF(n)		(0x1804 + (((n) - 1) * 4))
 | |
| #define  PCIE_WIN04_CTRL_OFF(n)		(0x1820 + ((n) << 4))
 | |
| #define  PCIE_WIN04_BASE_OFF(n)		(0x1824 + ((n) << 4))
 | |
| #define  PCIE_WIN04_REMAP_OFF(n)	(0x182c + ((n) << 4))
 | |
| #define PCIE_WIN5_CTRL_OFF		0x1880
 | |
| #define PCIE_WIN5_BASE_OFF		0x1884
 | |
| #define PCIE_WIN5_REMAP_OFF		0x188c
 | |
| #define PCIE_CONF_ADDR_OFF		0x18f8
 | |
| #define  PCIE_CONF_ADDR_EN		BIT(31)
 | |
| #define  PCIE_CONF_REG(r)		((((r) & 0xf00) << 16) | ((r) & 0xfc))
 | |
| #define  PCIE_CONF_BUS(b)		(((b) & 0xff) << 16)
 | |
| #define  PCIE_CONF_DEV(d)		(((d) & 0x1f) << 11)
 | |
| #define  PCIE_CONF_FUNC(f)		(((f) & 0x7) << 8)
 | |
| #define  PCIE_CONF_ADDR(dev, reg) \
 | |
| 	(PCIE_CONF_BUS(PCI_BUS(dev)) | PCIE_CONF_DEV(PCI_DEV(dev))    | \
 | |
| 	 PCIE_CONF_FUNC(PCI_FUNC(dev)) | PCIE_CONF_REG(reg) | \
 | |
| 	 PCIE_CONF_ADDR_EN)
 | |
| #define PCIE_CONF_DATA_OFF		0x18fc
 | |
| #define PCIE_MASK_OFF			0x1910
 | |
| #define  PCIE_MASK_ENABLE_INTS          (0xf << 24)
 | |
| #define PCIE_CTRL_OFF			0x1a00
 | |
| #define  PCIE_CTRL_X1_MODE		BIT(0)
 | |
| #define PCIE_STAT_OFF			0x1a04
 | |
| #define  PCIE_STAT_BUS                  (0xff << 8)
 | |
| #define  PCIE_STAT_DEV                  (0x1f << 16)
 | |
| #define  PCIE_STAT_LINK_DOWN		BIT(0)
 | |
| #define PCIE_DEBUG_CTRL			0x1a60
 | |
| #define  PCIE_DEBUG_SOFT_RESET		BIT(20)
 | |
| 
 | |
| struct mvebu_pcie {
 | |
| 	struct pci_controller hose;
 | |
| 	void __iomem *base;
 | |
| 	void __iomem *membase;
 | |
| 	struct resource mem;
 | |
| 	void __iomem *iobase;
 | |
| 	struct resource io;
 | |
| 	u32 port;
 | |
| 	u32 lane;
 | |
| 	int devfn;
 | |
| 	u32 lane_mask;
 | |
| 	int first_busno;
 | |
| 	int local_dev;
 | |
| 	char name[16];
 | |
| 	unsigned int mem_target;
 | |
| 	unsigned int mem_attr;
 | |
| 	unsigned int io_target;
 | |
| 	unsigned int io_attr;
 | |
| };
 | |
| 
 | |
| /*
 | |
|  * MVEBU PCIe controller needs MEMORY and I/O BARs to be mapped
 | |
|  * into SoCs address space. Each controller will map 128M of MEM
 | |
|  * and 64K of I/O space when registered.
 | |
|  */
 | |
| static void __iomem *mvebu_pcie_membase = (void __iomem *)MBUS_PCI_MEM_BASE;
 | |
| #define PCIE_MEM_SIZE	(128 << 20)
 | |
| static void __iomem *mvebu_pcie_iobase = (void __iomem *)MBUS_PCI_IO_BASE;
 | |
| 
 | |
| static inline bool mvebu_pcie_link_up(struct mvebu_pcie *pcie)
 | |
| {
 | |
| 	u32 val;
 | |
| 	val = readl(pcie->base + PCIE_STAT_OFF);
 | |
| 	return !(val & PCIE_STAT_LINK_DOWN);
 | |
| }
 | |
| 
 | |
| static void mvebu_pcie_set_local_bus_nr(struct mvebu_pcie *pcie, int busno)
 | |
| {
 | |
| 	u32 stat;
 | |
| 
 | |
| 	stat = readl(pcie->base + PCIE_STAT_OFF);
 | |
| 	stat &= ~PCIE_STAT_BUS;
 | |
| 	stat |= busno << 8;
 | |
| 	writel(stat, pcie->base + PCIE_STAT_OFF);
 | |
| }
 | |
| 
 | |
| static void mvebu_pcie_set_local_dev_nr(struct mvebu_pcie *pcie, int devno)
 | |
| {
 | |
| 	u32 stat;
 | |
| 
 | |
| 	stat = readl(pcie->base + PCIE_STAT_OFF);
 | |
| 	stat &= ~PCIE_STAT_DEV;
 | |
| 	stat |= devno << 16;
 | |
| 	writel(stat, pcie->base + PCIE_STAT_OFF);
 | |
| }
 | |
| 
 | |
| static int mvebu_pcie_get_local_bus_nr(struct mvebu_pcie *pcie)
 | |
| {
 | |
| 	u32 stat;
 | |
| 
 | |
| 	stat = readl(pcie->base + PCIE_STAT_OFF);
 | |
| 	return (stat & PCIE_STAT_BUS) >> 8;
 | |
| }
 | |
| 
 | |
| static int mvebu_pcie_get_local_dev_nr(struct mvebu_pcie *pcie)
 | |
| {
 | |
| 	u32 stat;
 | |
| 
 | |
| 	stat = readl(pcie->base + PCIE_STAT_OFF);
 | |
| 	return (stat & PCIE_STAT_DEV) >> 16;
 | |
| }
 | |
| 
 | |
| static inline struct mvebu_pcie *hose_to_pcie(struct pci_controller *hose)
 | |
| {
 | |
| 	return container_of(hose, struct mvebu_pcie, hose);
 | |
| }
 | |
| 
 | |
| static int mvebu_pcie_valid_addr(struct mvebu_pcie *pcie, pci_dev_t bdf)
 | |
| {
 | |
| 	/*
 | |
| 	 * There are two devices visible on local bus:
 | |
| 	 *   * on slot configured by function mvebu_pcie_set_local_dev_nr()
 | |
| 	 *     (by default this register is set to 0) there is a
 | |
| 	 *     "Marvell Memory controller", which isn't useful in root complex
 | |
| 	 *     mode,
 | |
| 	 *   * on all other slots the real PCIe card connected to the PCIe slot.
 | |
| 	 *
 | |
| 	 * We therefore allow access only to the real PCIe card.
 | |
| 	 */
 | |
| 	if (PCI_BUS(bdf) == pcie->first_busno &&
 | |
| 	    PCI_DEV(bdf) != !pcie->local_dev)
 | |
| 		return 0;
 | |
| 
 | |
| 	return 1;
 | |
| }
 | |
| 
 | |
| static int mvebu_pcie_read_config(const struct udevice *bus, pci_dev_t bdf,
 | |
| 				  uint offset, ulong *valuep,
 | |
| 				  enum pci_size_t size)
 | |
| {
 | |
| 	struct mvebu_pcie *pcie = dev_get_plat(bus);
 | |
| 	u32 data;
 | |
| 
 | |
| 	debug("PCIE CFG read: (b,d,f)=(%2d,%2d,%2d) ",
 | |
| 	      PCI_BUS(bdf), PCI_DEV(bdf), PCI_FUNC(bdf));
 | |
| 
 | |
| 	if (!mvebu_pcie_valid_addr(pcie, bdf)) {
 | |
| 		debug("- out of range\n");
 | |
| 		*valuep = pci_get_ff(size);
 | |
| 		return 0;
 | |
| 	}
 | |
| 
 | |
| 	/* write address */
 | |
| 	writel(PCIE_CONF_ADDR(bdf, offset), pcie->base + PCIE_CONF_ADDR_OFF);
 | |
| 
 | |
| 	/* read data */
 | |
| 	data = readl(pcie->base + PCIE_CONF_DATA_OFF);
 | |
| 	debug("(addr,size,val)=(0x%04x, %d, 0x%08x)\n", offset, size, data);
 | |
| 	*valuep = pci_conv_32_to_size(data, offset, size);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int mvebu_pcie_write_config(struct udevice *bus, pci_dev_t bdf,
 | |
| 				   uint offset, ulong value,
 | |
| 				   enum pci_size_t size)
 | |
| {
 | |
| 	struct mvebu_pcie *pcie = dev_get_plat(bus);
 | |
| 	u32 data;
 | |
| 
 | |
| 	debug("PCIE CFG write: (b,d,f)=(%2d,%2d,%2d) ",
 | |
| 	      PCI_BUS(bdf), PCI_DEV(bdf), PCI_FUNC(bdf));
 | |
| 	debug("(addr,size,val)=(0x%04x, %d, 0x%08lx)\n", offset, size, value);
 | |
| 
 | |
| 	if (!mvebu_pcie_valid_addr(pcie, bdf)) {
 | |
| 		debug("- out of range\n");
 | |
| 		return 0;
 | |
| 	}
 | |
| 
 | |
| 	/* write address */
 | |
| 	writel(PCIE_CONF_ADDR(bdf, offset), pcie->base + PCIE_CONF_ADDR_OFF);
 | |
| 
 | |
| 	/* write data */
 | |
| 	data = pci_conv_size_to_32(0, value, offset, size);
 | |
| 	writel(data, pcie->base + PCIE_CONF_DATA_OFF);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Setup PCIE BARs and Address Decode Wins:
 | |
|  * BAR[0,2] -> disabled, BAR[1] -> covers all DRAM banks
 | |
|  * WIN[0-3] -> DRAM bank[0-3]
 | |
|  */
 | |
| static void mvebu_pcie_setup_wins(struct mvebu_pcie *pcie)
 | |
| {
 | |
| 	const struct mbus_dram_target_info *dram = mvebu_mbus_dram_info();
 | |
| 	u32 size;
 | |
| 	int i;
 | |
| 
 | |
| 	/* First, disable and clear BARs and windows. */
 | |
| 	for (i = 1; i < 3; i++) {
 | |
| 		writel(0, pcie->base + PCIE_BAR_CTRL_OFF(i));
 | |
| 		writel(0, pcie->base + PCIE_BAR_LO_OFF(i));
 | |
| 		writel(0, pcie->base + PCIE_BAR_HI_OFF(i));
 | |
| 	}
 | |
| 
 | |
| 	for (i = 0; i < 5; i++) {
 | |
| 		writel(0, pcie->base + PCIE_WIN04_CTRL_OFF(i));
 | |
| 		writel(0, pcie->base + PCIE_WIN04_BASE_OFF(i));
 | |
| 		writel(0, pcie->base + PCIE_WIN04_REMAP_OFF(i));
 | |
| 	}
 | |
| 
 | |
| 	writel(0, pcie->base + PCIE_WIN5_CTRL_OFF);
 | |
| 	writel(0, pcie->base + PCIE_WIN5_BASE_OFF);
 | |
| 	writel(0, pcie->base + PCIE_WIN5_REMAP_OFF);
 | |
| 
 | |
| 	/* Setup windows for DDR banks. Count total DDR size on the fly. */
 | |
| 	size = 0;
 | |
| 	for (i = 0; i < dram->num_cs; i++) {
 | |
| 		const struct mbus_dram_window *cs = dram->cs + i;
 | |
| 
 | |
| 		writel(cs->base & 0xffff0000,
 | |
| 		       pcie->base + PCIE_WIN04_BASE_OFF(i));
 | |
| 		writel(0, pcie->base + PCIE_WIN04_REMAP_OFF(i));
 | |
| 		writel(((cs->size - 1) & 0xffff0000) |
 | |
| 		       (cs->mbus_attr << 8) |
 | |
| 		       (dram->mbus_dram_target_id << 4) | 1,
 | |
| 		       pcie->base + PCIE_WIN04_CTRL_OFF(i));
 | |
| 
 | |
| 		size += cs->size;
 | |
| 	}
 | |
| 
 | |
| 	/* Round up 'size' to the nearest power of two. */
 | |
| 	if ((size & (size - 1)) != 0)
 | |
| 		size = 1 << fls(size);
 | |
| 
 | |
| 	/* Setup BAR[1] to all DRAM banks. */
 | |
| 	writel(dram->cs[0].base | 0xc, pcie->base + PCIE_BAR_LO_OFF(1));
 | |
| 	writel(0, pcie->base + PCIE_BAR_HI_OFF(1));
 | |
| 	writel(((size - 1) & 0xffff0000) | 0x1,
 | |
| 	       pcie->base + PCIE_BAR_CTRL_OFF(1));
 | |
| }
 | |
| 
 | |
| static int mvebu_pcie_probe(struct udevice *dev)
 | |
| {
 | |
| 	struct mvebu_pcie *pcie = dev_get_plat(dev);
 | |
| 	struct udevice *ctlr = pci_get_controller(dev);
 | |
| 	struct pci_controller *hose = dev_get_uclass_priv(ctlr);
 | |
| 	int bus = dev_seq(dev);
 | |
| 	u32 reg;
 | |
| 
 | |
| 	debug("%s: PCIe %d.%d - up, base %08x\n", __func__,
 | |
| 	      pcie->port, pcie->lane, (u32)pcie->base);
 | |
| 
 | |
| 	/* Read Id info and local bus/dev */
 | |
| 	debug("direct conf read %08x, local bus %d, local dev %d\n",
 | |
| 	      readl(pcie->base), mvebu_pcie_get_local_bus_nr(pcie),
 | |
| 	      mvebu_pcie_get_local_dev_nr(pcie));
 | |
| 
 | |
| 	pcie->first_busno = bus;
 | |
| 	pcie->local_dev = 1;
 | |
| 
 | |
| 	mvebu_pcie_set_local_bus_nr(pcie, bus);
 | |
| 	mvebu_pcie_set_local_dev_nr(pcie, pcie->local_dev);
 | |
| 
 | |
| 	pcie->mem.start = (u32)mvebu_pcie_membase;
 | |
| 	pcie->mem.end = pcie->mem.start + PCIE_MEM_SIZE - 1;
 | |
| 	mvebu_pcie_membase += PCIE_MEM_SIZE;
 | |
| 
 | |
| 	if (mvebu_mbus_add_window_by_id(pcie->mem_target, pcie->mem_attr,
 | |
| 					(phys_addr_t)pcie->mem.start,
 | |
| 					PCIE_MEM_SIZE)) {
 | |
| 		printf("PCIe unable to add mbus window for mem at %08x+%08x\n",
 | |
| 		       (u32)pcie->mem.start, PCIE_MEM_SIZE);
 | |
| 	}
 | |
| 
 | |
| 	pcie->io.start = (u32)mvebu_pcie_iobase;
 | |
| 	pcie->io.end = pcie->io.start + MBUS_PCI_IO_SIZE - 1;
 | |
| 	mvebu_pcie_iobase += MBUS_PCI_IO_SIZE;
 | |
| 
 | |
| 	if (mvebu_mbus_add_window_by_id(pcie->io_target, pcie->io_attr,
 | |
| 					(phys_addr_t)pcie->io.start,
 | |
| 					MBUS_PCI_IO_SIZE)) {
 | |
| 		printf("PCIe unable to add mbus window for IO at %08x+%08x\n",
 | |
| 		       (u32)pcie->io.start, MBUS_PCI_IO_SIZE);
 | |
| 	}
 | |
| 
 | |
| 	/* Setup windows and configure host bridge */
 | |
| 	mvebu_pcie_setup_wins(pcie);
 | |
| 
 | |
| 	/* Master + slave enable. */
 | |
| 	reg = readl(pcie->base + PCIE_CMD_OFF);
 | |
| 	reg |= PCI_COMMAND_MEMORY;
 | |
| 	reg |= PCI_COMMAND_IO;
 | |
| 	reg |= PCI_COMMAND_MASTER;
 | |
| 	reg |= BIT(10);		/* disable interrupts */
 | |
| 	writel(reg, pcie->base + PCIE_CMD_OFF);
 | |
| 
 | |
| 	/* PCI memory space */
 | |
| 	pci_set_region(hose->regions + 0, pcie->mem.start,
 | |
| 		       pcie->mem.start, PCIE_MEM_SIZE, PCI_REGION_MEM);
 | |
| 	pci_set_region(hose->regions + 1,
 | |
| 		       0, 0,
 | |
| 		       gd->ram_size,
 | |
| 		       PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
 | |
| 	pci_set_region(hose->regions + 2, pcie->io.start,
 | |
| 		       pcie->io.start, MBUS_PCI_IO_SIZE, PCI_REGION_IO);
 | |
| 	hose->region_count = 3;
 | |
| 
 | |
| 	/* Set BAR0 to internal registers */
 | |
| 	writel(SOC_REGS_PHY_BASE, pcie->base + PCIE_BAR_LO_OFF(0));
 | |
| 	writel(0, pcie->base + PCIE_BAR_HI_OFF(0));
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int mvebu_pcie_port_parse_dt(ofnode node, struct mvebu_pcie *pcie)
 | |
| {
 | |
| 	const u32 *addr;
 | |
| 	int len;
 | |
| 
 | |
| 	addr = ofnode_get_property(node, "assigned-addresses", &len);
 | |
| 	if (!addr) {
 | |
| 		pr_err("property \"assigned-addresses\" not found");
 | |
| 		return -FDT_ERR_NOTFOUND;
 | |
| 	}
 | |
| 
 | |
| 	pcie->base = (void *)(fdt32_to_cpu(addr[2]) + SOC_REGS_PHY_BASE);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| #define DT_FLAGS_TO_TYPE(flags)       (((flags) >> 24) & 0x03)
 | |
| #define    DT_TYPE_IO                 0x1
 | |
| #define    DT_TYPE_MEM32              0x2
 | |
| #define DT_CPUADDR_TO_TARGET(cpuaddr) (((cpuaddr) >> 56) & 0xFF)
 | |
| #define DT_CPUADDR_TO_ATTR(cpuaddr)   (((cpuaddr) >> 48) & 0xFF)
 | |
| 
 | |
| static int mvebu_get_tgt_attr(ofnode node, int devfn,
 | |
| 			      unsigned long type,
 | |
| 			      unsigned int *tgt,
 | |
| 			      unsigned int *attr)
 | |
| {
 | |
| 	const int na = 3, ns = 2;
 | |
| 	const __be32 *range;
 | |
| 	int rlen, nranges, rangesz, pna, i;
 | |
| 
 | |
| 	*tgt = -1;
 | |
| 	*attr = -1;
 | |
| 
 | |
| 	range = ofnode_get_property(node, "ranges", &rlen);
 | |
| 	if (!range)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	/*
 | |
| 	 * Linux uses of_n_addr_cells() to get the number of address cells
 | |
| 	 * here. Currently this function is only available in U-Boot when
 | |
| 	 * CONFIG_OF_LIVE is enabled. Until this is enabled for MVEBU in
 | |
| 	 * general, lets't hardcode the "pna" value in the U-Boot code.
 | |
| 	 */
 | |
| 	pna = 2; /* hardcoded for now because of lack of of_n_addr_cells() */
 | |
| 	rangesz = pna + na + ns;
 | |
| 	nranges = rlen / sizeof(__be32) / rangesz;
 | |
| 
 | |
| 	for (i = 0; i < nranges; i++, range += rangesz) {
 | |
| 		u32 flags = of_read_number(range, 1);
 | |
| 		u32 slot = of_read_number(range + 1, 1);
 | |
| 		u64 cpuaddr = of_read_number(range + na, pna);
 | |
| 		unsigned long rtype;
 | |
| 
 | |
| 		if (DT_FLAGS_TO_TYPE(flags) == DT_TYPE_IO)
 | |
| 			rtype = IORESOURCE_IO;
 | |
| 		else if (DT_FLAGS_TO_TYPE(flags) == DT_TYPE_MEM32)
 | |
| 			rtype = IORESOURCE_MEM;
 | |
| 		else
 | |
| 			continue;
 | |
| 
 | |
| 		/*
 | |
| 		 * The Linux code used PCI_SLOT() here, which expects devfn
 | |
| 		 * in bits 7..0. PCI_DEV() in U-Boot is similar to PCI_SLOT(),
 | |
| 		 * only expects devfn in 15..8, where its saved in this driver.
 | |
| 		 */
 | |
| 		if (slot == PCI_DEV(devfn) && type == rtype) {
 | |
| 			*tgt = DT_CPUADDR_TO_TARGET(cpuaddr);
 | |
| 			*attr = DT_CPUADDR_TO_ATTR(cpuaddr);
 | |
| 			return 0;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	return -ENOENT;
 | |
| }
 | |
| 
 | |
| static int mvebu_pcie_of_to_plat(struct udevice *dev)
 | |
| {
 | |
| 	struct mvebu_pcie *pcie = dev_get_plat(dev);
 | |
| 	int ret = 0;
 | |
| 
 | |
| 	/* Get port number, lane number and memory target / attr */
 | |
| 	if (ofnode_read_u32(dev_ofnode(dev), "marvell,pcie-port",
 | |
| 			    &pcie->port)) {
 | |
| 		ret = -ENODEV;
 | |
| 		goto err;
 | |
| 	}
 | |
| 
 | |
| 	if (ofnode_read_u32(dev_ofnode(dev), "marvell,pcie-lane", &pcie->lane))
 | |
| 		pcie->lane = 0;
 | |
| 
 | |
| 	sprintf(pcie->name, "pcie%d.%d", pcie->port, pcie->lane);
 | |
| 
 | |
| 	/* pci_get_devfn() returns devfn in bits 15..8, see PCI_DEV usage */
 | |
| 	pcie->devfn = pci_get_devfn(dev);
 | |
| 	if (pcie->devfn < 0) {
 | |
| 		ret = -ENODEV;
 | |
| 		goto err;
 | |
| 	}
 | |
| 
 | |
| 	ret = mvebu_get_tgt_attr(dev_ofnode(dev->parent), pcie->devfn,
 | |
| 				 IORESOURCE_MEM,
 | |
| 				 &pcie->mem_target, &pcie->mem_attr);
 | |
| 	if (ret < 0) {
 | |
| 		printf("%s: cannot get tgt/attr for mem window\n", pcie->name);
 | |
| 		goto err;
 | |
| 	}
 | |
| 
 | |
| 	ret = mvebu_get_tgt_attr(dev_ofnode(dev->parent), pcie->devfn,
 | |
| 				 IORESOURCE_IO,
 | |
| 				 &pcie->io_target, &pcie->io_attr);
 | |
| 	if (ret < 0) {
 | |
| 		printf("%s: cannot get tgt/attr for IO window\n", pcie->name);
 | |
| 		goto err;
 | |
| 	}
 | |
| 
 | |
| 	/* Parse PCIe controller register base from DT */
 | |
| 	ret = mvebu_pcie_port_parse_dt(dev_ofnode(dev), pcie);
 | |
| 	if (ret < 0)
 | |
| 		goto err;
 | |
| 
 | |
| 	/* Check link and skip ports that have no link */
 | |
| 	if (!mvebu_pcie_link_up(pcie)) {
 | |
| 		debug("%s: %s - down\n", __func__, pcie->name);
 | |
| 		ret = -ENODEV;
 | |
| 		goto err;
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| 
 | |
| err:
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static const struct dm_pci_ops mvebu_pcie_ops = {
 | |
| 	.read_config	= mvebu_pcie_read_config,
 | |
| 	.write_config	= mvebu_pcie_write_config,
 | |
| };
 | |
| 
 | |
| static struct driver pcie_mvebu_drv = {
 | |
| 	.name			= "pcie_mvebu",
 | |
| 	.id			= UCLASS_PCI,
 | |
| 	.ops			= &mvebu_pcie_ops,
 | |
| 	.probe			= mvebu_pcie_probe,
 | |
| 	.of_to_plat	= mvebu_pcie_of_to_plat,
 | |
| 	.plat_auto	= sizeof(struct mvebu_pcie),
 | |
| };
 | |
| 
 | |
| /*
 | |
|  * Use a MISC device to bind the n instances (child nodes) of the
 | |
|  * PCIe base controller in UCLASS_PCI.
 | |
|  */
 | |
| static int mvebu_pcie_bind(struct udevice *parent)
 | |
| {
 | |
| 	struct mvebu_pcie *pcie;
 | |
| 	struct uclass_driver *drv;
 | |
| 	struct udevice *dev;
 | |
| 	ofnode subnode;
 | |
| 
 | |
| 	/* Lookup eth driver */
 | |
| 	drv = lists_uclass_lookup(UCLASS_PCI);
 | |
| 	if (!drv) {
 | |
| 		puts("Cannot find PCI driver\n");
 | |
| 		return -ENOENT;
 | |
| 	}
 | |
| 
 | |
| 	ofnode_for_each_subnode(subnode, dev_ofnode(parent)) {
 | |
| 		if (!ofnode_is_available(subnode))
 | |
| 			continue;
 | |
| 
 | |
| 		pcie = calloc(1, sizeof(*pcie));
 | |
| 		if (!pcie)
 | |
| 			return -ENOMEM;
 | |
| 
 | |
| 		/* Create child device UCLASS_PCI and bind it */
 | |
| 		device_bind(parent, &pcie_mvebu_drv, pcie->name, pcie, subnode,
 | |
| 			    &dev);
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static const struct udevice_id mvebu_pcie_ids[] = {
 | |
| 	{ .compatible = "marvell,armada-xp-pcie" },
 | |
| 	{ .compatible = "marvell,armada-370-pcie" },
 | |
| 	{ }
 | |
| };
 | |
| 
 | |
| U_BOOT_DRIVER(pcie_mvebu_base) = {
 | |
| 	.name			= "pcie_mvebu_base",
 | |
| 	.id			= UCLASS_MISC,
 | |
| 	.of_match		= mvebu_pcie_ids,
 | |
| 	.bind			= mvebu_pcie_bind,
 | |
| };
 |