367 lines
		
	
	
		
			11 KiB
		
	
	
	
		
			C
		
	
	
	
			
		
		
	
	
			367 lines
		
	
	
		
			11 KiB
		
	
	
	
		
			C
		
	
	
	
| /*
 | |
|  * Xilinx xps_ll_temac ethernet driver for u-boot
 | |
|  *
 | |
|  * SDMA sub-controller
 | |
|  *
 | |
|  * Copyright (C) 2011 - 2012 Stephan Linz <linz@li-pro.net>
 | |
|  * Copyright (C) 2008 - 2011 Michal Simek <monstr@monstr.eu>
 | |
|  * Copyright (C) 2008 - 2011 PetaLogix
 | |
|  *
 | |
|  * Based on Yoshio Kashiwagi kashiwagi@co-nss.co.jp driver
 | |
|  * Copyright (C) 2008 Nissin Systems Co.,Ltd.
 | |
|  * March 2008 created
 | |
|  *
 | |
|  * CREDITS: tsec driver
 | |
|  *
 | |
|  * SPDX-License-Identifier:	GPL-2.0+
 | |
|  *
 | |
|  * [0]: http://www.xilinx.com/support/documentation
 | |
|  *
 | |
|  * [M]:	[0]/ip_documentation/mpmc.pdf
 | |
|  * [S]:	[0]/ip_documentation/xps_ll_temac.pdf
 | |
|  * [A]:	[0]/application_notes/xapp1041.pdf
 | |
|  */
 | |
| 
 | |
| #include <config.h>
 | |
| #include <common.h>
 | |
| #include <net.h>
 | |
| 
 | |
| #include <asm/types.h>
 | |
| #include <asm/io.h>
 | |
| 
 | |
| #include "xilinx_ll_temac.h"
 | |
| #include "xilinx_ll_temac_sdma.h"
 | |
| 
 | |
| #define TX_BUF_CNT		2
 | |
| 
 | |
| static unsigned int rx_idx;	/* index of the current RX buffer */
 | |
| static unsigned int tx_idx;	/* index of the current TX buffer */
 | |
| 
 | |
| struct rtx_cdmac_bd {
 | |
| 	struct cdmac_bd rx[PKTBUFSRX];
 | |
| 	struct cdmac_bd tx[TX_BUF_CNT];
 | |
| };
 | |
| 
 | |
| /*
 | |
|  * DMA Buffer Descriptor alignment
 | |
|  *
 | |
|  * If the address contained in the Next Descriptor Pointer register is not
 | |
|  * 8-word aligned or reaches beyond the range of available memory, the SDMA
 | |
|  * halts processing and sets the CDMAC_BD_STCTRL_ERROR bit in the respective
 | |
|  * status register (tx_chnl_sts or rx_chnl_sts).
 | |
|  *
 | |
|  * [1]: [0]/ip_documentation/mpmc.pdf
 | |
|  *      page 161, Next Descriptor Pointer
 | |
|  */
 | |
| static struct rtx_cdmac_bd cdmac_bd __aligned(32);
 | |
| 
 | |
| #if defined(CONFIG_XILINX_440) || defined(CONFIG_XILINX_405)
 | |
| 
 | |
| /*
 | |
|  * Indirect DCR access operations mi{ft}dcr_xilinx() espacialy
 | |
|  * for Xilinx PowerPC implementations on FPGA.
 | |
|  *
 | |
|  * FIXME: This part should go up to arch/powerpc -- but where?
 | |
|  */
 | |
| #include <asm/processor.h>
 | |
| #define XILINX_INDIRECT_DCR_ADDRESS_REG	0
 | |
| #define XILINX_INDIRECT_DCR_ACCESS_REG	1
 | |
| inline unsigned mifdcr_xilinx(const unsigned dcrn)
 | |
| {
 | |
| 	mtdcr(XILINX_INDIRECT_DCR_ADDRESS_REG, dcrn);
 | |
| 	return mfdcr(XILINX_INDIRECT_DCR_ACCESS_REG);
 | |
| }
 | |
| inline void mitdcr_xilinx(const unsigned dcrn, int val)
 | |
| {
 | |
| 	mtdcr(XILINX_INDIRECT_DCR_ADDRESS_REG, dcrn);
 | |
| 	mtdcr(XILINX_INDIRECT_DCR_ACCESS_REG, val);
 | |
| }
 | |
| 
 | |
| /* Xilinx Device Control Register (DCR) in/out accessors */
 | |
| inline unsigned ll_temac_xldcr_in32(phys_addr_t addr)
 | |
| {
 | |
| 	return mifdcr_xilinx((const unsigned)addr);
 | |
| }
 | |
| inline void ll_temac_xldcr_out32(phys_addr_t addr, unsigned value)
 | |
| {
 | |
| 	mitdcr_xilinx((const unsigned)addr, value);
 | |
| }
 | |
| 
 | |
| void ll_temac_collect_xldcr_sdma_reg_addr(struct eth_device *dev)
 | |
| {
 | |
| 	struct ll_temac *ll_temac = dev->priv;
 | |
| 	phys_addr_t dmac_ctrl = ll_temac->ctrladdr;
 | |
| 	phys_addr_t *ra = ll_temac->sdma_reg_addr;
 | |
| 
 | |
| 	ra[TX_NXTDESC_PTR]   = dmac_ctrl + TX_NXTDESC_PTR;
 | |
| 	ra[TX_CURBUF_ADDR]   = dmac_ctrl + TX_CURBUF_ADDR;
 | |
| 	ra[TX_CURBUF_LENGTH] = dmac_ctrl + TX_CURBUF_LENGTH;
 | |
| 	ra[TX_CURDESC_PTR]   = dmac_ctrl + TX_CURDESC_PTR;
 | |
| 	ra[TX_TAILDESC_PTR]  = dmac_ctrl + TX_TAILDESC_PTR;
 | |
| 	ra[TX_CHNL_CTRL]     = dmac_ctrl + TX_CHNL_CTRL;
 | |
| 	ra[TX_IRQ_REG]       = dmac_ctrl + TX_IRQ_REG;
 | |
| 	ra[TX_CHNL_STS]      = dmac_ctrl + TX_CHNL_STS;
 | |
| 	ra[RX_NXTDESC_PTR]   = dmac_ctrl + RX_NXTDESC_PTR;
 | |
| 	ra[RX_CURBUF_ADDR]   = dmac_ctrl + RX_CURBUF_ADDR;
 | |
| 	ra[RX_CURBUF_LENGTH] = dmac_ctrl + RX_CURBUF_LENGTH;
 | |
| 	ra[RX_CURDESC_PTR]   = dmac_ctrl + RX_CURDESC_PTR;
 | |
| 	ra[RX_TAILDESC_PTR]  = dmac_ctrl + RX_TAILDESC_PTR;
 | |
| 	ra[RX_CHNL_CTRL]     = dmac_ctrl + RX_CHNL_CTRL;
 | |
| 	ra[RX_IRQ_REG]       = dmac_ctrl + RX_IRQ_REG;
 | |
| 	ra[RX_CHNL_STS]      = dmac_ctrl + RX_CHNL_STS;
 | |
| 	ra[DMA_CONTROL_REG]  = dmac_ctrl + DMA_CONTROL_REG;
 | |
| }
 | |
| 
 | |
| #endif /* CONFIG_XILINX_440 || ONFIG_XILINX_405 */
 | |
| 
 | |
| /* Xilinx Processor Local Bus (PLB) in/out accessors */
 | |
| inline unsigned ll_temac_xlplb_in32(phys_addr_t addr)
 | |
| {
 | |
| 	return in_be32((void *)addr);
 | |
| }
 | |
| inline void ll_temac_xlplb_out32(phys_addr_t addr, unsigned value)
 | |
| {
 | |
| 	out_be32((void *)addr, value);
 | |
| }
 | |
| 
 | |
| /* collect all register addresses for Xilinx PLB in/out accessors */
 | |
| void ll_temac_collect_xlplb_sdma_reg_addr(struct eth_device *dev)
 | |
| {
 | |
| 	struct ll_temac *ll_temac = dev->priv;
 | |
| 	struct sdma_ctrl *sdma_ctrl = (void *)ll_temac->ctrladdr;
 | |
| 	phys_addr_t *ra = ll_temac->sdma_reg_addr;
 | |
| 
 | |
| 	ra[TX_NXTDESC_PTR]   = (phys_addr_t)&sdma_ctrl->tx_nxtdesc_ptr;
 | |
| 	ra[TX_CURBUF_ADDR]   = (phys_addr_t)&sdma_ctrl->tx_curbuf_addr;
 | |
| 	ra[TX_CURBUF_LENGTH] = (phys_addr_t)&sdma_ctrl->tx_curbuf_length;
 | |
| 	ra[TX_CURDESC_PTR]   = (phys_addr_t)&sdma_ctrl->tx_curdesc_ptr;
 | |
| 	ra[TX_TAILDESC_PTR]  = (phys_addr_t)&sdma_ctrl->tx_taildesc_ptr;
 | |
| 	ra[TX_CHNL_CTRL]     = (phys_addr_t)&sdma_ctrl->tx_chnl_ctrl;
 | |
| 	ra[TX_IRQ_REG]       = (phys_addr_t)&sdma_ctrl->tx_irq_reg;
 | |
| 	ra[TX_CHNL_STS]      = (phys_addr_t)&sdma_ctrl->tx_chnl_sts;
 | |
| 	ra[RX_NXTDESC_PTR]   = (phys_addr_t)&sdma_ctrl->rx_nxtdesc_ptr;
 | |
| 	ra[RX_CURBUF_ADDR]   = (phys_addr_t)&sdma_ctrl->rx_curbuf_addr;
 | |
| 	ra[RX_CURBUF_LENGTH] = (phys_addr_t)&sdma_ctrl->rx_curbuf_length;
 | |
| 	ra[RX_CURDESC_PTR]   = (phys_addr_t)&sdma_ctrl->rx_curdesc_ptr;
 | |
| 	ra[RX_TAILDESC_PTR]  = (phys_addr_t)&sdma_ctrl->rx_taildesc_ptr;
 | |
| 	ra[RX_CHNL_CTRL]     = (phys_addr_t)&sdma_ctrl->rx_chnl_ctrl;
 | |
| 	ra[RX_IRQ_REG]       = (phys_addr_t)&sdma_ctrl->rx_irq_reg;
 | |
| 	ra[RX_CHNL_STS]      = (phys_addr_t)&sdma_ctrl->rx_chnl_sts;
 | |
| 	ra[DMA_CONTROL_REG]  = (phys_addr_t)&sdma_ctrl->dma_control_reg;
 | |
| }
 | |
| 
 | |
| /* Check for TX and RX channel errors. */
 | |
| static inline int ll_temac_sdma_error(struct eth_device *dev)
 | |
| {
 | |
| 	int err;
 | |
| 	struct ll_temac *ll_temac = dev->priv;
 | |
| 	phys_addr_t *ra = ll_temac->sdma_reg_addr;
 | |
| 
 | |
| 	err = ll_temac->in32(ra[TX_CHNL_STS]) & CHNL_STS_ERROR;
 | |
| 	err |= ll_temac->in32(ra[RX_CHNL_STS]) & CHNL_STS_ERROR;
 | |
| 
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| int ll_temac_init_sdma(struct eth_device *dev)
 | |
| {
 | |
| 	struct ll_temac *ll_temac = dev->priv;
 | |
| 	struct cdmac_bd *rx_dp;
 | |
| 	struct cdmac_bd *tx_dp;
 | |
| 	phys_addr_t *ra = ll_temac->sdma_reg_addr;
 | |
| 	int i;
 | |
| 
 | |
| 	printf("%s: SDMA: %d Rx buffers, %d Tx buffers\n",
 | |
| 			dev->name, PKTBUFSRX, TX_BUF_CNT);
 | |
| 
 | |
| 	/* Initialize the Rx Buffer descriptors */
 | |
| 	for (i = 0; i < PKTBUFSRX; i++) {
 | |
| 		rx_dp = &cdmac_bd.rx[i];
 | |
| 		memset(rx_dp, 0, sizeof(*rx_dp));
 | |
| 		rx_dp->next_p = rx_dp;
 | |
| 		rx_dp->buf_len = PKTSIZE_ALIGN;
 | |
| 		rx_dp->phys_buf_p = (u8 *)NetRxPackets[i];
 | |
| 		flush_cache((u32)rx_dp->phys_buf_p, PKTSIZE_ALIGN);
 | |
| 	}
 | |
| 	flush_cache((u32)cdmac_bd.rx, sizeof(cdmac_bd.rx));
 | |
| 
 | |
| 	/* Initialize the TX Buffer Descriptors */
 | |
| 	for (i = 0; i < TX_BUF_CNT; i++) {
 | |
| 		tx_dp = &cdmac_bd.tx[i];
 | |
| 		memset(tx_dp, 0, sizeof(*tx_dp));
 | |
| 		tx_dp->next_p = tx_dp;
 | |
| 	}
 | |
| 	flush_cache((u32)cdmac_bd.tx, sizeof(cdmac_bd.tx));
 | |
| 
 | |
| 	/* Reset index counter to the Rx and Tx Buffer descriptors */
 | |
| 	rx_idx = tx_idx = 0;
 | |
| 
 | |
| 	/* initial Rx DMA start by writing to respective TAILDESC_PTR */
 | |
| 	ll_temac->out32(ra[RX_CURDESC_PTR], (int)&cdmac_bd.rx[rx_idx]);
 | |
| 	ll_temac->out32(ra[RX_TAILDESC_PTR], (int)&cdmac_bd.rx[rx_idx]);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| int ll_temac_halt_sdma(struct eth_device *dev)
 | |
| {
 | |
| 	unsigned timeout = 50;	/* 1usec * 50 = 50usec */
 | |
| 	struct ll_temac *ll_temac = dev->priv;
 | |
| 	phys_addr_t *ra = ll_temac->sdma_reg_addr;
 | |
| 
 | |
| 	/*
 | |
| 	 * Soft reset the DMA
 | |
| 	 *
 | |
| 	 * Quote from MPMC documentation: Writing a 1 to this field
 | |
| 	 * forces the DMA engine to shutdown and reset itself. After
 | |
| 	 * setting this bit, software must poll it until the bit is
 | |
| 	 * cleared by the DMA. This indicates that the reset process
 | |
| 	 * is done and the pipeline has been flushed.
 | |
| 	 */
 | |
| 	ll_temac->out32(ra[DMA_CONTROL_REG], DMA_CONTROL_RESET);
 | |
| 	while (timeout && (ll_temac->in32(ra[DMA_CONTROL_REG])
 | |
| 					& DMA_CONTROL_RESET)) {
 | |
| 		timeout--;
 | |
| 		udelay(1);
 | |
| 	}
 | |
| 
 | |
| 	if (!timeout) {
 | |
| 		printf("%s: Timeout\n", __func__);
 | |
| 		return -1;
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| int ll_temac_reset_sdma(struct eth_device *dev)
 | |
| {
 | |
| 	u32 r;
 | |
| 	struct ll_temac *ll_temac = dev->priv;
 | |
| 	phys_addr_t *ra = ll_temac->sdma_reg_addr;
 | |
| 
 | |
| 	/* Soft reset the DMA.  */
 | |
| 	if (ll_temac_halt_sdma(dev))
 | |
| 		return -1;
 | |
| 
 | |
| 	/* Now clear the interrupts.  */
 | |
| 	r = ll_temac->in32(ra[TX_CHNL_CTRL]);
 | |
| 	r &= ~CHNL_CTRL_IRQ_MASK;
 | |
| 	ll_temac->out32(ra[TX_CHNL_CTRL], r);
 | |
| 
 | |
| 	r = ll_temac->in32(ra[RX_CHNL_CTRL]);
 | |
| 	r &= ~CHNL_CTRL_IRQ_MASK;
 | |
| 	ll_temac->out32(ra[RX_CHNL_CTRL], r);
 | |
| 
 | |
| 	/* Now ACK pending IRQs.  */
 | |
| 	ll_temac->out32(ra[TX_IRQ_REG], IRQ_REG_IRQ_MASK);
 | |
| 	ll_temac->out32(ra[RX_IRQ_REG], IRQ_REG_IRQ_MASK);
 | |
| 
 | |
| 	/* Set tail-ptr mode, disable errors for both channels.  */
 | |
| 	ll_temac->out32(ra[DMA_CONTROL_REG],
 | |
| 			/* Enable use of tail pointer register */
 | |
| 			DMA_CONTROL_TPE |
 | |
| 			/* Disable error when 2 or 4 bit coalesce cnt overfl */
 | |
| 			DMA_CONTROL_RXOCEID |
 | |
| 			/* Disable error when 2 or 4 bit coalesce cnt overfl */
 | |
| 			DMA_CONTROL_TXOCEID);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| int ll_temac_recv_sdma(struct eth_device *dev)
 | |
| {
 | |
| 	int length, pb_idx;
 | |
| 	struct cdmac_bd *rx_dp = &cdmac_bd.rx[rx_idx];
 | |
| 	struct ll_temac *ll_temac = dev->priv;
 | |
| 	phys_addr_t *ra = ll_temac->sdma_reg_addr;
 | |
| 
 | |
| 	if (ll_temac_sdma_error(dev)) {
 | |
| 
 | |
| 		if (ll_temac_reset_sdma(dev))
 | |
| 			return -1;
 | |
| 
 | |
| 		ll_temac_init_sdma(dev);
 | |
| 	}
 | |
| 
 | |
| 	flush_cache((u32)rx_dp, sizeof(*rx_dp));
 | |
| 
 | |
| 	if (!(rx_dp->sca.stctrl & CDMAC_BD_STCTRL_COMPLETED))
 | |
| 		return 0;
 | |
| 
 | |
| 	if (rx_dp->sca.stctrl & (CDMAC_BD_STCTRL_SOP | CDMAC_BD_STCTRL_EOP)) {
 | |
| 		pb_idx = rx_idx;
 | |
| 		length = rx_dp->sca.app[4] & CDMAC_BD_APP4_RXBYTECNT_MASK;
 | |
| 	} else {
 | |
| 		pb_idx = -1;
 | |
| 		length = 0;
 | |
| 		printf("%s: Got part of package, unsupported (%x)\n",
 | |
| 				__func__, rx_dp->sca.stctrl);
 | |
| 	}
 | |
| 
 | |
| 	/* flip the buffer */
 | |
| 	flush_cache((u32)rx_dp->phys_buf_p, length);
 | |
| 
 | |
| 	/* reset the current descriptor */
 | |
| 	rx_dp->sca.stctrl = 0;
 | |
| 	rx_dp->sca.app[4] = 0;
 | |
| 	flush_cache((u32)rx_dp, sizeof(*rx_dp));
 | |
| 
 | |
| 	/* Find next empty buffer descriptor, preparation for next iteration */
 | |
| 	rx_idx = (rx_idx + 1) % PKTBUFSRX;
 | |
| 	rx_dp = &cdmac_bd.rx[rx_idx];
 | |
| 	flush_cache((u32)rx_dp, sizeof(*rx_dp));
 | |
| 
 | |
| 	/* DMA start by writing to respective TAILDESC_PTR */
 | |
| 	ll_temac->out32(ra[RX_CURDESC_PTR], (int)&cdmac_bd.rx[rx_idx]);
 | |
| 	ll_temac->out32(ra[RX_TAILDESC_PTR], (int)&cdmac_bd.rx[rx_idx]);
 | |
| 
 | |
| 	if (length > 0 && pb_idx != -1)
 | |
| 		NetReceive(NetRxPackets[pb_idx], length);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| int ll_temac_send_sdma(struct eth_device *dev, void *packet, int length)
 | |
| {
 | |
| 	unsigned timeout = 50;	/* 1usec * 50 = 50usec */
 | |
| 	struct cdmac_bd *tx_dp = &cdmac_bd.tx[tx_idx];
 | |
| 	struct ll_temac *ll_temac = dev->priv;
 | |
| 	phys_addr_t *ra = ll_temac->sdma_reg_addr;
 | |
| 
 | |
| 	if (ll_temac_sdma_error(dev)) {
 | |
| 
 | |
| 		if (ll_temac_reset_sdma(dev))
 | |
| 			return -1;
 | |
| 
 | |
| 		ll_temac_init_sdma(dev);
 | |
| 	}
 | |
| 
 | |
| 	tx_dp->phys_buf_p = (u8 *)packet;
 | |
| 	tx_dp->buf_len = length;
 | |
| 	tx_dp->sca.stctrl = CDMAC_BD_STCTRL_SOP | CDMAC_BD_STCTRL_EOP |
 | |
| 			CDMAC_BD_STCTRL_STOP_ON_END;
 | |
| 
 | |
| 	flush_cache((u32)packet, length);
 | |
| 	flush_cache((u32)tx_dp, sizeof(*tx_dp));
 | |
| 
 | |
| 	/* DMA start by writing to respective TAILDESC_PTR */
 | |
| 	ll_temac->out32(ra[TX_CURDESC_PTR], (int)tx_dp);
 | |
| 	ll_temac->out32(ra[TX_TAILDESC_PTR], (int)tx_dp);
 | |
| 
 | |
| 	/* Find next empty buffer descriptor, preparation for next iteration */
 | |
| 	tx_idx = (tx_idx + 1) % TX_BUF_CNT;
 | |
| 	tx_dp = &cdmac_bd.tx[tx_idx];
 | |
| 
 | |
| 	do {
 | |
| 		flush_cache((u32)tx_dp, sizeof(*tx_dp));
 | |
| 		udelay(1);
 | |
| 	} while (timeout-- && !(tx_dp->sca.stctrl & CDMAC_BD_STCTRL_COMPLETED));
 | |
| 
 | |
| 	if (!timeout) {
 | |
| 		printf("%s: Timeout\n", __func__);
 | |
| 		return -1;
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 |