534 lines
		
	
	
		
			12 KiB
		
	
	
	
		
			C
		
	
	
	
			
		
		
	
	
			534 lines
		
	
	
		
			12 KiB
		
	
	
	
		
			C
		
	
	
	
/*
 | 
						|
 * (C) Copyright 2010
 | 
						|
 * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
 | 
						|
 *
 | 
						|
 * See file CREDITS for list of people who contributed to this
 | 
						|
 * project.
 | 
						|
 *
 | 
						|
 * This program is free software; you can redistribute it and/or
 | 
						|
 * modify it under the terms of the GNU General Public License as
 | 
						|
 * published by the Free Software Foundation; either version 2 of
 | 
						|
 * the License, or (at your option) any later version.
 | 
						|
 *
 | 
						|
 * This program is distributed in the hope that it will be useful,
 | 
						|
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 | 
						|
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 | 
						|
 * GNU General Public License for more details.
 | 
						|
 *
 | 
						|
 * You should have received a copy of the GNU General Public License
 | 
						|
 * along with this program; if not, write to the Free Software
 | 
						|
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 | 
						|
 * MA 02111-1307 USA
 | 
						|
 */
 | 
						|
 | 
						|
/*
 | 
						|
 * Designware ethernet IP driver for u-boot
 | 
						|
 */
 | 
						|
 | 
						|
#include <common.h>
 | 
						|
#include <miiphy.h>
 | 
						|
#include <malloc.h>
 | 
						|
#include <linux/err.h>
 | 
						|
#include <asm/io.h>
 | 
						|
#include "designware.h"
 | 
						|
 | 
						|
static void tx_descs_init(struct eth_device *dev)
 | 
						|
{
 | 
						|
	struct dw_eth_dev *priv = dev->priv;
 | 
						|
	struct eth_dma_regs *dma_p = priv->dma_regs_p;
 | 
						|
	struct dmamacdescr *desc_table_p = &priv->tx_mac_descrtable[0];
 | 
						|
	char *txbuffs = &priv->txbuffs[0];
 | 
						|
	struct dmamacdescr *desc_p;
 | 
						|
	u32 idx;
 | 
						|
 | 
						|
	for (idx = 0; idx < CONFIG_TX_DESCR_NUM; idx++) {
 | 
						|
		desc_p = &desc_table_p[idx];
 | 
						|
		desc_p->dmamac_addr = &txbuffs[idx * CONFIG_ETH_BUFSIZE];
 | 
						|
		desc_p->dmamac_next = &desc_table_p[idx + 1];
 | 
						|
 | 
						|
#if defined(CONFIG_DW_ALTDESCRIPTOR)
 | 
						|
		desc_p->txrx_status &= ~(DESC_TXSTS_TXINT | DESC_TXSTS_TXLAST |
 | 
						|
				DESC_TXSTS_TXFIRST | DESC_TXSTS_TXCRCDIS | \
 | 
						|
				DESC_TXSTS_TXCHECKINSCTRL | \
 | 
						|
				DESC_TXSTS_TXRINGEND | DESC_TXSTS_TXPADDIS);
 | 
						|
 | 
						|
		desc_p->txrx_status |= DESC_TXSTS_TXCHAIN;
 | 
						|
		desc_p->dmamac_cntl = 0;
 | 
						|
		desc_p->txrx_status &= ~(DESC_TXSTS_MSK | DESC_TXSTS_OWNBYDMA);
 | 
						|
#else
 | 
						|
		desc_p->dmamac_cntl = DESC_TXCTRL_TXCHAIN;
 | 
						|
		desc_p->txrx_status = 0;
 | 
						|
#endif
 | 
						|
	}
 | 
						|
 | 
						|
	/* Correcting the last pointer of the chain */
 | 
						|
	desc_p->dmamac_next = &desc_table_p[0];
 | 
						|
 | 
						|
	writel((ulong)&desc_table_p[0], &dma_p->txdesclistaddr);
 | 
						|
}
 | 
						|
 | 
						|
static void rx_descs_init(struct eth_device *dev)
 | 
						|
{
 | 
						|
	struct dw_eth_dev *priv = dev->priv;
 | 
						|
	struct eth_dma_regs *dma_p = priv->dma_regs_p;
 | 
						|
	struct dmamacdescr *desc_table_p = &priv->rx_mac_descrtable[0];
 | 
						|
	char *rxbuffs = &priv->rxbuffs[0];
 | 
						|
	struct dmamacdescr *desc_p;
 | 
						|
	u32 idx;
 | 
						|
 | 
						|
	for (idx = 0; idx < CONFIG_RX_DESCR_NUM; idx++) {
 | 
						|
		desc_p = &desc_table_p[idx];
 | 
						|
		desc_p->dmamac_addr = &rxbuffs[idx * CONFIG_ETH_BUFSIZE];
 | 
						|
		desc_p->dmamac_next = &desc_table_p[idx + 1];
 | 
						|
 | 
						|
		desc_p->dmamac_cntl =
 | 
						|
			(MAC_MAX_FRAME_SZ & DESC_RXCTRL_SIZE1MASK) | \
 | 
						|
				      DESC_RXCTRL_RXCHAIN;
 | 
						|
 | 
						|
		desc_p->txrx_status = DESC_RXSTS_OWNBYDMA;
 | 
						|
	}
 | 
						|
 | 
						|
	/* Correcting the last pointer of the chain */
 | 
						|
	desc_p->dmamac_next = &desc_table_p[0];
 | 
						|
 | 
						|
	writel((ulong)&desc_table_p[0], &dma_p->rxdesclistaddr);
 | 
						|
}
 | 
						|
 | 
						|
static void descs_init(struct eth_device *dev)
 | 
						|
{
 | 
						|
	tx_descs_init(dev);
 | 
						|
	rx_descs_init(dev);
 | 
						|
}
 | 
						|
 | 
						|
static int mac_reset(struct eth_device *dev)
 | 
						|
{
 | 
						|
	struct dw_eth_dev *priv = dev->priv;
 | 
						|
	struct eth_mac_regs *mac_p = priv->mac_regs_p;
 | 
						|
	struct eth_dma_regs *dma_p = priv->dma_regs_p;
 | 
						|
 | 
						|
	int timeout = CONFIG_MACRESET_TIMEOUT;
 | 
						|
 | 
						|
	writel(DMAMAC_SRST, &dma_p->busmode);
 | 
						|
	writel(MII_PORTSELECT, &mac_p->conf);
 | 
						|
 | 
						|
	do {
 | 
						|
		if (!(readl(&dma_p->busmode) & DMAMAC_SRST))
 | 
						|
			return 0;
 | 
						|
		udelay(1000);
 | 
						|
	} while (timeout--);
 | 
						|
 | 
						|
	return -1;
 | 
						|
}
 | 
						|
 | 
						|
static int dw_write_hwaddr(struct eth_device *dev)
 | 
						|
{
 | 
						|
	struct dw_eth_dev *priv = dev->priv;
 | 
						|
	struct eth_mac_regs *mac_p = priv->mac_regs_p;
 | 
						|
	u32 macid_lo, macid_hi;
 | 
						|
	u8 *mac_id = &dev->enetaddr[0];
 | 
						|
 | 
						|
	macid_lo = mac_id[0] + (mac_id[1] << 8) + \
 | 
						|
		   (mac_id[2] << 16) + (mac_id[3] << 24);
 | 
						|
	macid_hi = mac_id[4] + (mac_id[5] << 8);
 | 
						|
 | 
						|
	writel(macid_hi, &mac_p->macaddr0hi);
 | 
						|
	writel(macid_lo, &mac_p->macaddr0lo);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int dw_eth_init(struct eth_device *dev, bd_t *bis)
 | 
						|
{
 | 
						|
	struct dw_eth_dev *priv = dev->priv;
 | 
						|
	struct eth_mac_regs *mac_p = priv->mac_regs_p;
 | 
						|
	struct eth_dma_regs *dma_p = priv->dma_regs_p;
 | 
						|
	u32 conf;
 | 
						|
 | 
						|
	/* Reset ethernet hardware */
 | 
						|
	if (mac_reset(dev) < 0)
 | 
						|
		return -1;
 | 
						|
 | 
						|
	writel(FIXEDBURST | PRIORXTX_41 | BURST_16,
 | 
						|
			&dma_p->busmode);
 | 
						|
 | 
						|
	writel(FLUSHTXFIFO | readl(&dma_p->opmode), &dma_p->opmode);
 | 
						|
	writel(STOREFORWARD | TXSECONDFRAME, &dma_p->opmode);
 | 
						|
 | 
						|
	conf = FRAMEBURSTENABLE | DISABLERXOWN;
 | 
						|
 | 
						|
	if (priv->speed != SPEED_1000M)
 | 
						|
		conf |= MII_PORTSELECT;
 | 
						|
 | 
						|
	if (priv->duplex == FULL_DUPLEX)
 | 
						|
		conf |= FULLDPLXMODE;
 | 
						|
 | 
						|
	writel(conf, &mac_p->conf);
 | 
						|
 | 
						|
	descs_init(dev);
 | 
						|
 | 
						|
	/*
 | 
						|
	 * Start/Enable xfer at dma as well as mac level
 | 
						|
	 */
 | 
						|
	writel(readl(&dma_p->opmode) | RXSTART, &dma_p->opmode);
 | 
						|
	writel(readl(&dma_p->opmode) | TXSTART, &dma_p->opmode);
 | 
						|
 | 
						|
	writel(readl(&mac_p->conf) | RXENABLE, &mac_p->conf);
 | 
						|
	writel(readl(&mac_p->conf) | TXENABLE, &mac_p->conf);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int dw_eth_send(struct eth_device *dev, volatile void *packet,
 | 
						|
		int length)
 | 
						|
{
 | 
						|
	struct dw_eth_dev *priv = dev->priv;
 | 
						|
	struct eth_dma_regs *dma_p = priv->dma_regs_p;
 | 
						|
	u32 desc_num = priv->tx_currdescnum;
 | 
						|
	struct dmamacdescr *desc_p = &priv->tx_mac_descrtable[desc_num];
 | 
						|
 | 
						|
	/* Check if the descriptor is owned by CPU */
 | 
						|
	if (desc_p->txrx_status & DESC_TXSTS_OWNBYDMA) {
 | 
						|
		printf("CPU not owner of tx frame\n");
 | 
						|
		return -1;
 | 
						|
	}
 | 
						|
 | 
						|
	memcpy((void *)desc_p->dmamac_addr, (void *)packet, length);
 | 
						|
 | 
						|
#if defined(CONFIG_DW_ALTDESCRIPTOR)
 | 
						|
	desc_p->txrx_status |= DESC_TXSTS_TXFIRST | DESC_TXSTS_TXLAST;
 | 
						|
	desc_p->dmamac_cntl |= (length << DESC_TXCTRL_SIZE1SHFT) & \
 | 
						|
			       DESC_TXCTRL_SIZE1MASK;
 | 
						|
 | 
						|
	desc_p->txrx_status &= ~(DESC_TXSTS_MSK);
 | 
						|
	desc_p->txrx_status |= DESC_TXSTS_OWNBYDMA;
 | 
						|
#else
 | 
						|
	desc_p->dmamac_cntl |= ((length << DESC_TXCTRL_SIZE1SHFT) & \
 | 
						|
			       DESC_TXCTRL_SIZE1MASK) | DESC_TXCTRL_TXLAST | \
 | 
						|
			       DESC_TXCTRL_TXFIRST;
 | 
						|
 | 
						|
	desc_p->txrx_status = DESC_TXSTS_OWNBYDMA;
 | 
						|
#endif
 | 
						|
 | 
						|
	/* Test the wrap-around condition. */
 | 
						|
	if (++desc_num >= CONFIG_TX_DESCR_NUM)
 | 
						|
		desc_num = 0;
 | 
						|
 | 
						|
	priv->tx_currdescnum = desc_num;
 | 
						|
 | 
						|
	/* Start the transmission */
 | 
						|
	writel(POLL_DATA, &dma_p->txpolldemand);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int dw_eth_recv(struct eth_device *dev)
 | 
						|
{
 | 
						|
	struct dw_eth_dev *priv = dev->priv;
 | 
						|
	u32 desc_num = priv->rx_currdescnum;
 | 
						|
	struct dmamacdescr *desc_p = &priv->rx_mac_descrtable[desc_num];
 | 
						|
 | 
						|
	u32 status = desc_p->txrx_status;
 | 
						|
	int length = 0;
 | 
						|
 | 
						|
	/* Check  if the owner is the CPU */
 | 
						|
	if (!(status & DESC_RXSTS_OWNBYDMA)) {
 | 
						|
 | 
						|
		length = (status & DESC_RXSTS_FRMLENMSK) >> \
 | 
						|
			 DESC_RXSTS_FRMLENSHFT;
 | 
						|
 | 
						|
		NetReceive(desc_p->dmamac_addr, length);
 | 
						|
 | 
						|
		/*
 | 
						|
		 * Make the current descriptor valid again and go to
 | 
						|
		 * the next one
 | 
						|
		 */
 | 
						|
		desc_p->txrx_status |= DESC_RXSTS_OWNBYDMA;
 | 
						|
 | 
						|
		/* Test the wrap-around condition. */
 | 
						|
		if (++desc_num >= CONFIG_RX_DESCR_NUM)
 | 
						|
			desc_num = 0;
 | 
						|
	}
 | 
						|
 | 
						|
	priv->rx_currdescnum = desc_num;
 | 
						|
 | 
						|
	return length;
 | 
						|
}
 | 
						|
 | 
						|
static void dw_eth_halt(struct eth_device *dev)
 | 
						|
{
 | 
						|
	struct dw_eth_dev *priv = dev->priv;
 | 
						|
 | 
						|
	mac_reset(dev);
 | 
						|
	priv->tx_currdescnum = priv->rx_currdescnum = 0;
 | 
						|
}
 | 
						|
 | 
						|
static int eth_mdio_read(struct eth_device *dev, u8 addr, u8 reg, u16 *val)
 | 
						|
{
 | 
						|
	struct dw_eth_dev *priv = dev->priv;
 | 
						|
	struct eth_mac_regs *mac_p = priv->mac_regs_p;
 | 
						|
	u32 miiaddr;
 | 
						|
	int timeout = CONFIG_MDIO_TIMEOUT;
 | 
						|
 | 
						|
	miiaddr = ((addr << MIIADDRSHIFT) & MII_ADDRMSK) | \
 | 
						|
		  ((reg << MIIREGSHIFT) & MII_REGMSK);
 | 
						|
 | 
						|
	writel(miiaddr | MII_CLKRANGE_150_250M | MII_BUSY, &mac_p->miiaddr);
 | 
						|
 | 
						|
	do {
 | 
						|
		if (!(readl(&mac_p->miiaddr) & MII_BUSY)) {
 | 
						|
			*val = readl(&mac_p->miidata);
 | 
						|
			return 0;
 | 
						|
		}
 | 
						|
		udelay(1000);
 | 
						|
	} while (timeout--);
 | 
						|
 | 
						|
	return -1;
 | 
						|
}
 | 
						|
 | 
						|
static int eth_mdio_write(struct eth_device *dev, u8 addr, u8 reg, u16 val)
 | 
						|
{
 | 
						|
	struct dw_eth_dev *priv = dev->priv;
 | 
						|
	struct eth_mac_regs *mac_p = priv->mac_regs_p;
 | 
						|
	u32 miiaddr;
 | 
						|
	int ret = -1, timeout = CONFIG_MDIO_TIMEOUT;
 | 
						|
	u16 value;
 | 
						|
 | 
						|
	writel(val, &mac_p->miidata);
 | 
						|
	miiaddr = ((addr << MIIADDRSHIFT) & MII_ADDRMSK) | \
 | 
						|
		  ((reg << MIIREGSHIFT) & MII_REGMSK) | MII_WRITE;
 | 
						|
 | 
						|
	writel(miiaddr | MII_CLKRANGE_150_250M | MII_BUSY, &mac_p->miiaddr);
 | 
						|
 | 
						|
	do {
 | 
						|
		if (!(readl(&mac_p->miiaddr) & MII_BUSY))
 | 
						|
			ret = 0;
 | 
						|
		udelay(1000);
 | 
						|
	} while (timeout--);
 | 
						|
 | 
						|
	/* Needed as a fix for ST-Phy */
 | 
						|
	eth_mdio_read(dev, addr, reg, &value);
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
#if defined(CONFIG_DW_SEARCH_PHY)
 | 
						|
static int find_phy(struct eth_device *dev)
 | 
						|
{
 | 
						|
	int phy_addr = 0;
 | 
						|
	u16 ctrl, oldctrl;
 | 
						|
 | 
						|
	do {
 | 
						|
		eth_mdio_read(dev, phy_addr, MII_BMCR, &ctrl);
 | 
						|
		oldctrl = ctrl & BMCR_ANENABLE;
 | 
						|
 | 
						|
		ctrl ^= BMCR_ANENABLE;
 | 
						|
		eth_mdio_write(dev, phy_addr, MII_BMCR, ctrl);
 | 
						|
		eth_mdio_read(dev, phy_addr, MII_BMCR, &ctrl);
 | 
						|
		ctrl &= BMCR_ANENABLE;
 | 
						|
 | 
						|
		if (ctrl == oldctrl) {
 | 
						|
			phy_addr++;
 | 
						|
		} else {
 | 
						|
			ctrl ^= BMCR_ANENABLE;
 | 
						|
			eth_mdio_write(dev, phy_addr, MII_BMCR, ctrl);
 | 
						|
 | 
						|
			return phy_addr;
 | 
						|
		}
 | 
						|
	} while (phy_addr < 32);
 | 
						|
 | 
						|
	return -1;
 | 
						|
}
 | 
						|
#endif
 | 
						|
 | 
						|
static int dw_reset_phy(struct eth_device *dev)
 | 
						|
{
 | 
						|
	struct dw_eth_dev *priv = dev->priv;
 | 
						|
	u16 ctrl;
 | 
						|
	int timeout = CONFIG_PHYRESET_TIMEOUT;
 | 
						|
	u32 phy_addr = priv->address;
 | 
						|
 | 
						|
	eth_mdio_write(dev, phy_addr, MII_BMCR, BMCR_RESET);
 | 
						|
	do {
 | 
						|
		eth_mdio_read(dev, phy_addr, MII_BMCR, &ctrl);
 | 
						|
		if (!(ctrl & BMCR_RESET))
 | 
						|
			break;
 | 
						|
		udelay(1000);
 | 
						|
	} while (timeout--);
 | 
						|
 | 
						|
	if (timeout < 0)
 | 
						|
		return -1;
 | 
						|
 | 
						|
#ifdef CONFIG_PHY_RESET_DELAY
 | 
						|
	udelay(CONFIG_PHY_RESET_DELAY);
 | 
						|
#endif
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int configure_phy(struct eth_device *dev)
 | 
						|
{
 | 
						|
	struct dw_eth_dev *priv = dev->priv;
 | 
						|
	int phy_addr;
 | 
						|
	u16 bmcr;
 | 
						|
#if defined(CONFIG_DW_AUTONEG)
 | 
						|
	u16 bmsr;
 | 
						|
	u32 timeout;
 | 
						|
	u16 anlpar, btsr;
 | 
						|
#else
 | 
						|
	u16 ctrl;
 | 
						|
#endif
 | 
						|
 | 
						|
#if defined(CONFIG_DW_SEARCH_PHY)
 | 
						|
	phy_addr = find_phy(dev);
 | 
						|
	if (phy_addr > 0)
 | 
						|
		priv->address = phy_addr;
 | 
						|
	else
 | 
						|
		return -1;
 | 
						|
#endif
 | 
						|
	if (dw_reset_phy(dev) < 0)
 | 
						|
		return -1;
 | 
						|
 | 
						|
#if defined(CONFIG_DW_AUTONEG)
 | 
						|
	bmcr = BMCR_ANENABLE | BMCR_ANRESTART | BMCR_SPEED100 | \
 | 
						|
	       BMCR_FULLDPLX | BMCR_SPEED1000;
 | 
						|
#else
 | 
						|
	bmcr = BMCR_SPEED100 | BMCR_FULLDPLX;
 | 
						|
 | 
						|
#if defined(CONFIG_DW_SPEED10M)
 | 
						|
	bmcr &= ~BMCR_SPEED100;
 | 
						|
#endif
 | 
						|
#if defined(CONFIG_DW_DUPLEXHALF)
 | 
						|
	bmcr &= ~BMCR_FULLDPLX;
 | 
						|
#endif
 | 
						|
#endif
 | 
						|
	if (eth_mdio_write(dev, phy_addr, MII_BMCR, bmcr) < 0)
 | 
						|
		return -1;
 | 
						|
 | 
						|
	/* Read the phy status register and populate priv structure */
 | 
						|
#if defined(CONFIG_DW_AUTONEG)
 | 
						|
	timeout = CONFIG_AUTONEG_TIMEOUT;
 | 
						|
	do {
 | 
						|
		eth_mdio_read(dev, phy_addr, MII_BMSR, &bmsr);
 | 
						|
		if (bmsr & BMSR_ANEGCOMPLETE)
 | 
						|
			break;
 | 
						|
		udelay(1000);
 | 
						|
	} while (timeout--);
 | 
						|
 | 
						|
	eth_mdio_read(dev, phy_addr, MII_LPA, &anlpar);
 | 
						|
	eth_mdio_read(dev, phy_addr, MII_STAT1000, &btsr);
 | 
						|
 | 
						|
	if (btsr & (PHY_1000BTSR_1000FD | PHY_1000BTSR_1000HD)) {
 | 
						|
		priv->speed = SPEED_1000M;
 | 
						|
		if (btsr & PHY_1000BTSR_1000FD)
 | 
						|
			priv->duplex = FULL_DUPLEX;
 | 
						|
		else
 | 
						|
			priv->duplex = HALF_DUPLEX;
 | 
						|
	} else {
 | 
						|
		if (anlpar & LPA_100)
 | 
						|
			priv->speed = SPEED_100M;
 | 
						|
		else
 | 
						|
			priv->speed = SPEED_10M;
 | 
						|
 | 
						|
		if (anlpar & (LPA_10FULL | LPA_100FULL))
 | 
						|
			priv->duplex = FULL_DUPLEX;
 | 
						|
		else
 | 
						|
			priv->duplex = HALF_DUPLEX;
 | 
						|
	}
 | 
						|
#else
 | 
						|
	if (eth_mdio_read(dev, phy_addr, MII_BMCR, &ctrl) < 0)
 | 
						|
		return -1;
 | 
						|
 | 
						|
	if (ctrl & BMCR_FULLDPLX)
 | 
						|
		priv->duplex = FULL_DUPLEX;
 | 
						|
	else
 | 
						|
		priv->duplex = HALF_DUPLEX;
 | 
						|
 | 
						|
	if (ctrl & BMCR_SPEED1000)
 | 
						|
		priv->speed = SPEED_1000M;
 | 
						|
	else if (ctrl & BMCR_SPEED100)
 | 
						|
		priv->speed = SPEED_100M;
 | 
						|
	else
 | 
						|
		priv->speed = SPEED_10M;
 | 
						|
#endif
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
#if defined(CONFIG_MII)
 | 
						|
static int dw_mii_read(const char *devname, u8 addr, u8 reg, u16 *val)
 | 
						|
{
 | 
						|
	struct eth_device *dev;
 | 
						|
 | 
						|
	dev = eth_get_dev_by_name(devname);
 | 
						|
	if (dev)
 | 
						|
		eth_mdio_read(dev, addr, reg, val);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int dw_mii_write(const char *devname, u8 addr, u8 reg, u16 val)
 | 
						|
{
 | 
						|
	struct eth_device *dev;
 | 
						|
 | 
						|
	dev = eth_get_dev_by_name(devname);
 | 
						|
	if (dev)
 | 
						|
		eth_mdio_write(dev, addr, reg, val);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
#endif
 | 
						|
 | 
						|
int designware_initialize(u32 id, ulong base_addr, u32 phy_addr)
 | 
						|
{
 | 
						|
	struct eth_device *dev;
 | 
						|
	struct dw_eth_dev *priv;
 | 
						|
 | 
						|
	dev = (struct eth_device *) malloc(sizeof(struct eth_device));
 | 
						|
	if (!dev)
 | 
						|
		return -ENOMEM;
 | 
						|
 | 
						|
	/*
 | 
						|
	 * Since the priv structure contains the descriptors which need a strict
 | 
						|
	 * buswidth alignment, memalign is used to allocate memory
 | 
						|
	 */
 | 
						|
	priv = (struct dw_eth_dev *) memalign(16, sizeof(struct dw_eth_dev));
 | 
						|
	if (!priv) {
 | 
						|
		free(dev);
 | 
						|
		return -ENOMEM;
 | 
						|
	}
 | 
						|
 | 
						|
	memset(dev, 0, sizeof(struct eth_device));
 | 
						|
	memset(priv, 0, sizeof(struct dw_eth_dev));
 | 
						|
 | 
						|
	sprintf(dev->name, "mii%d", id);
 | 
						|
	dev->iobase = (int)base_addr;
 | 
						|
	dev->priv = priv;
 | 
						|
 | 
						|
	eth_getenv_enetaddr_by_index(id, &dev->enetaddr[0]);
 | 
						|
 | 
						|
	priv->dev = dev;
 | 
						|
	priv->mac_regs_p = (struct eth_mac_regs *)base_addr;
 | 
						|
	priv->dma_regs_p = (struct eth_dma_regs *)(base_addr +
 | 
						|
			DW_DMA_BASE_OFFSET);
 | 
						|
	priv->address = phy_addr;
 | 
						|
 | 
						|
	if (mac_reset(dev) < 0)
 | 
						|
		return -1;
 | 
						|
 | 
						|
	if (configure_phy(dev) < 0) {
 | 
						|
		printf("Phy could not be configured\n");
 | 
						|
		return -1;
 | 
						|
	}
 | 
						|
 | 
						|
	dev->init = dw_eth_init;
 | 
						|
	dev->send = dw_eth_send;
 | 
						|
	dev->recv = dw_eth_recv;
 | 
						|
	dev->halt = dw_eth_halt;
 | 
						|
	dev->write_hwaddr = dw_write_hwaddr;
 | 
						|
 | 
						|
	eth_register(dev);
 | 
						|
 | 
						|
#if defined(CONFIG_MII)
 | 
						|
	miiphy_register(dev->name, dw_mii_read, dw_mii_write);
 | 
						|
#endif
 | 
						|
	return 1;
 | 
						|
}
 |