88 lines
		
	
	
		
			2.1 KiB
		
	
	
	
		
			C
		
	
	
	
			
		
		
	
	
			88 lines
		
	
	
		
			2.1 KiB
		
	
	
	
		
			C
		
	
	
	
// SPDX-License-Identifier: GPL-2.0+
 | 
						|
/*
 | 
						|
 * Copyright (C) 2014 Google, Inc
 | 
						|
 */
 | 
						|
 | 
						|
#include <common.h>
 | 
						|
#include <dm.h>
 | 
						|
#include <pch.h>
 | 
						|
 | 
						|
#define GPIO_BASE	0x44
 | 
						|
#define BIOS_CTRL	0xd8
 | 
						|
 | 
						|
static int pch7_get_spi_base(struct udevice *dev, ulong *sbasep)
 | 
						|
{
 | 
						|
	u32 rcba;
 | 
						|
 | 
						|
	dm_pci_read_config32(dev, PCH_RCBA, &rcba);
 | 
						|
	/* Bits 31-14 are the base address, 13-1 are reserved, 0 is enable */
 | 
						|
	rcba = rcba & 0xffffc000;
 | 
						|
	*sbasep = rcba + 0x3020;
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int pch7_set_spi_protect(struct udevice *dev, bool protect)
 | 
						|
{
 | 
						|
	uint8_t bios_cntl;
 | 
						|
 | 
						|
	/* Adjust the BIOS write protect to dis/allow write commands */
 | 
						|
	dm_pci_read_config8(dev, BIOS_CTRL, &bios_cntl);
 | 
						|
	if (protect)
 | 
						|
		bios_cntl &= ~BIOS_CTRL_BIOSWE;
 | 
						|
	else
 | 
						|
		bios_cntl |= BIOS_CTRL_BIOSWE;
 | 
						|
	dm_pci_write_config8(dev, BIOS_CTRL, bios_cntl);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int pch7_get_gpio_base(struct udevice *dev, u32 *gbasep)
 | 
						|
{
 | 
						|
	u32 base;
 | 
						|
 | 
						|
	/*
 | 
						|
	 * GPIO_BASE moved to its current offset with ICH6, but prior to
 | 
						|
	 * that it was unused (or undocumented). Check that it looks
 | 
						|
	 * okay: not all ones or zeros.
 | 
						|
	 *
 | 
						|
	 * Note we don't need check bit0 here, because the Tunnel Creek
 | 
						|
	 * GPIO base address register bit0 is reserved (read returns 0),
 | 
						|
	 * while on the Ivybridge the bit0 is used to indicate it is an
 | 
						|
	 * I/O space.
 | 
						|
	 */
 | 
						|
	dm_pci_read_config32(dev, GPIO_BASE, &base);
 | 
						|
	if (base == 0x00000000 || base == 0xffffffff) {
 | 
						|
		debug("%s: unexpected BASE value\n", __func__);
 | 
						|
		return -ENODEV;
 | 
						|
	}
 | 
						|
 | 
						|
	/*
 | 
						|
	 * Okay, I guess we're looking at the right device. The actual
 | 
						|
	 * GPIO registers are in the PCI device's I/O space, starting
 | 
						|
	 * at the offset that we just read. Bit 0 indicates that it's
 | 
						|
	 * an I/O address, not a memory address, so mask that off.
 | 
						|
	 */
 | 
						|
	*gbasep = base & 1 ? base & ~3 : base & ~15;
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static const struct pch_ops pch7_ops = {
 | 
						|
	.get_spi_base	= pch7_get_spi_base,
 | 
						|
	.set_spi_protect = pch7_set_spi_protect,
 | 
						|
	.get_gpio_base	= pch7_get_gpio_base,
 | 
						|
};
 | 
						|
 | 
						|
static const struct udevice_id pch7_ids[] = {
 | 
						|
	{ .compatible = "intel,pch7" },
 | 
						|
	{ }
 | 
						|
};
 | 
						|
 | 
						|
U_BOOT_DRIVER(pch7_drv) = {
 | 
						|
	.name		= "intel-pch7",
 | 
						|
	.id		= UCLASS_PCH,
 | 
						|
	.of_match	= pch7_ids,
 | 
						|
	.ops		= &pch7_ops,
 | 
						|
};
 |