README: remove deprecated documentation
Please check netmodule-linux.readthedocs.io instead. Signed-off-by: Patrick Zysset <patrick.zysset@netmodule.com>
This commit is contained in:
Patrick Zysset
parent
d9cbc9d9fe
commit
6308680578
127
README
127
README
|
|
@ -1,134 +1,11 @@
|
|||
This layer depends on:
|
||||
|
||||
URI: git://git.yoctoproject.org/poky
|
||||
branch: jethro
|
||||
branch: warrior
|
||||
revision: HEAD
|
||||
|
||||
URI: git://git.openembedded.org/meta-openembedded
|
||||
branch: jethro
|
||||
branch: warrior
|
||||
revision: HEAD
|
||||
layers: meta-python, meta-oe, meta-networking
|
||||
|
||||
To get an image that is compatible with the NetModule router, build an nmrouter-image. Set the MACHINE in conf/local.conf to
|
||||
MACHINE = "armada-385-nbhw17" (NB2800),
|
||||
MACHINE = "armada-385-nbhw14" (NB3800/NB3711/NB3701) or
|
||||
MACHINE = "am335x-nrhw16" # Internal name for NB800 family
|
||||
and add the following layers to conf/bblayers.conf:
|
||||
BBLAYERS ?= " \
|
||||
<poky dir>/meta \
|
||||
<poky dir>/meta-yocto \
|
||||
<poky dir>/meta-nmrouter \
|
||||
<poky dir>/meta-openembedded/meta-python \
|
||||
<poky dir>/meta-openembedded/meta-oe \
|
||||
<poky dir>/meta-openembedded/meta-networking \
|
||||
"
|
||||
|
||||
NB2800:
|
||||
While the NetModule router is running under the original software you have to do the following steps:
|
||||
- Find out what boot partition is currently used:
|
||||
cat /proc/cmdline
|
||||
- The partition layout is mmcblk0p1 => bootpart0, mmcblk0p2 => bootpart1, mmcblk0p3=> overlay/data partition, mmcblk0p4 => user storage
|
||||
- Untar the output of the nmrouter-image build to the partition that is not in use (if the above cmd returns mmcblk0p1 then to mmcblk0p2)
|
||||
mount /dev/mmcblk0p2 /mnt
|
||||
rm -rf /mnt/*
|
||||
tar -xjf ./<image>.tar.bz2 -C /mnt
|
||||
- reboot the netmodule router
|
||||
- in u-boot you have to manually overwrite the bootcmd. Use the correct boot partition (bootpart0 => 0:1, bootpart1 => 0:2)
|
||||
setenv bootcmd 'ext4load mmc 0:2 $kernel_addr /boot/zImage && ext4load mmc 0:2 $fdt_addr /boot/armada-385-nbhw17-nb2800.dtb && setenv bootargs root=/dev/mmcblk0p2 rw rootfstype=ext4 console=ttyS0,115200 rootwait && bootz $kernel_addr - $fdt_addr'
|
||||
saveenv # save the environment in eeprom (ignore message during bootup)
|
||||
- boot to Linux:
|
||||
boot
|
||||
|
||||
Do not overwrite the original partition, u-boot will search a valid FPGA there. If you want to overwrite the other partition, make sure you copy the /logic folder from the original partition to the new one!
|
||||
|
||||
To learn how to build an image and to find the build dependencies visit:
|
||||
http://www.yoctoproject.org/docs/2.0/ref-manual/ref-manual.html
|
||||
|
||||
Memory Map of the FPGA (to switch SIMs, reset modems):
|
||||
Address Width Name/Comment
|
||||
0x0020 16 LED
|
||||
LED Control Register
|
||||
Slice Name Type Reset Description
|
||||
0 LED0 green RW 1 Enable LED 0 (green)
|
||||
1 LED0 red RW 1 Enable LED 0 (red)
|
||||
2 LED1 green RW 0 Enable LED 1 (green)
|
||||
3 LED1 red RW 0 Enable LED 1 (red)
|
||||
4 LED2 green RW 0 Enable LED 2 (green)
|
||||
5 LED2 red RW 0 Enable LED 2 (red)
|
||||
6 LED3 green RW 0 Enable LED 3 (green)
|
||||
7 LED3 red RW 0 Enable LED 3 (red)
|
||||
8 LED4 green RW 0 Enable LED 4 (green)
|
||||
9 LED4 red RW 0 Enable LED 4 (red)
|
||||
10 LED5 green RW 0 Enable LED 5 (green)
|
||||
11 LED5 red RW 0 Enable LED 5 (red)
|
||||
12 LED6 green RW 0 Enable LED 6 (green)
|
||||
13 LED6 red RW 0 Enable LED 6 (red)
|
||||
14 LED7 green RW 0 Enable LED 7 (green)
|
||||
15 LED7 red RW 0 Enable LED 7 (red)
|
||||
|
||||
SIM Card Control
|
||||
Address Width Name/Comment
|
||||
0x0040 16 SIM Ctrl
|
||||
SIM Slot Control Register
|
||||
Slice Name Type Reset Description
|
||||
2..0 SIM1_SEL RW 0 000: disconnect
|
||||
001: Connect Bus 1
|
||||
010: Connect Bus 2
|
||||
011: Connect Bus 3
|
||||
100: Connect Bus 4
|
||||
Note: If no SIM Card is inserted, the power is disable of the corresponding slot.
|
||||
3 N/A R 0 Reserved
|
||||
6..4 SIM2_SEL RW 0 000: disconnect
|
||||
001: Connect Bus 1
|
||||
010: Connect Bus 2
|
||||
011: Connect Bus 3
|
||||
100: Connect Bus 4
|
||||
Note: If no SIM Card is inserted, the power is disabled of the corresponding slot.
|
||||
7 N/A R 0 Reserved
|
||||
10..8 SIM3_SEL RW 0 000: disconnect
|
||||
001: Connect Bus 1
|
||||
010: Connect Bus 2
|
||||
011: Connect Bus 3
|
||||
100: Connect Bus 4
|
||||
Note: If no SIM Card is inserted, the power is disable of the corresponding slot.
|
||||
11 N/A R 0 Reserved
|
||||
14..12 SIM4_SE RW 0 000: disconnect
|
||||
001: Connect Bus 1
|
||||
010: Connect Bus 2
|
||||
011: Connect Bus 3
|
||||
100: Connect Bus 4
|
||||
Note: If no SIM Card is inserted, the power is disabled of the corresponding slot.
|
||||
15 N/A R 0 Reserved
|
||||
|
||||
|
||||
PCIe Mini Slot Control:
|
||||
Address Width Name/Comment
|
||||
0x0030 16 PCIe Reset
|
||||
PCIe Slot Reset
|
||||
Slice Name Type Reset Description
|
||||
0 PCIe1 RST~ RW 0 PCIe Slot 1 Reset
|
||||
0: reset asserted
|
||||
1 PCIe2 RST~ RW 0 PCIe Slot 2 Reset
|
||||
0: reset asserted
|
||||
2 PCIe3 RST~ RW 0 PCIe Slot 3 Reset
|
||||
0: reset asserted
|
||||
3 PCIe4 RST~ RW 0 PCIe Slot 4 Reset
|
||||
0: reset asserted
|
||||
4..15 n/a R 0
|
||||
|
||||
The FPGA Base address is at 0xfd000000, to enable for example LED0:red write 0x2 to 0xfd000020:
|
||||
devmem2 0xfd000020 hw 0x02
|
||||
|
||||
NB800:
|
||||
Coming from NetModule Software:
|
||||
- Use the same steps as for NB2800 to install a custom rootfs
|
||||
- You don't need to modify the u-boot environment, the NB800 automatically tries to load the correct dtb and the kernel /boot/zImage
|
||||
- There is no FPGA available necessary for the NB800
|
||||
|
||||
Coming from an older Yocto image:
|
||||
- To update the software you can do a sw-update.sh -l <rootfs.tar.gz>
|
||||
- To read and write to the board descriptor use bd read/read-all/write
|
||||
- To connect configure the modem and network interface use mmcli and nmcli (ModemManager and NetworkManager)
|
||||
|
||||
For questions, send an email to <stefan.eichenberger@netmodule.com>
|
||||
|
||||
|
|
|
|||
Loading…
Reference in New Issue