LM
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
37,995 Commits 68 Branches 337 Tags 212 MiB
Commit Graph

9552 Commits

Author SHA1 Message Date
Lucien Mueller 93a35c7311 nmhw21: deactivate rs232 reset. 
This makes it possible to boot normaly with disconnected uart line.
Previously the system booted into recovery in that case.

BugzID: 65200

Signed-off-by: Lucien Mueller <lucien.mueller@netmodule.com>
 2020-08-07 10:30:55 +02:00
Rene Straub 567a630018 hw21,hw26: remove ATECC test function 2020-06-26 16:23:40 +02:00
Rene Straub e2bf817634 nmhw21,26: fix incorrect indentation 2020-06-15 16:00:47 +02:00
Rene Straub e0f24ed684 nmhw21,26: change sim_sel to timepulse 
gpio2_16 is re-defined as timepulse input on hw26.
On hw21 it was the non-working SIM_SEL_N.
Mux config changed, keeping pin input.
 2020-06-15 15:08:56 +02:00
Rene Straub 7336361d5c nmhw21,26: init pmic based on hw type 2020-06-15 14:18:32 +02:00
Rene Straub a02c9b9da3 nmhw21,26: getting hardware type from BD 
this is the precursor to make the bootloader hw26 aware.
 2020-06-15 13:45:51 +02:00
Rene Straub f51b3b4fc3 nrhw: add board descriptor hw_type support 2020-06-15 13:33:46 +02:00
René Straub 7b1000b59d nmhw21: board: add user reset option via rs232 
allow invoking factory reset and recovery boot via:
- uart break, followed by command ('r', 'f')
- using uart rxd as reset line

Co-authored-by: Rene Straub <rene.straub@netmodule.com>
Reviewed-by: Patrick Zysset <patrick.zysset@netmodule.com>
 2020-06-08 16:15:27 +02:00
Marcel Reichmuth a3fd0500ec nmhw21: sja1105: allow max length ethernet frames when using vlan tagging 
Increase switch MTU size from 1518 up to 1522 for all ports.

Configuration reference:
repo: git.netmodule.intranet/hancock/nmhw-sja1105-configs
commit id: c20a8a3d87223f8fdbdcc60173ee11ec0514ad1d

BugzID: 61914, 57376

Signed-off-by: Ramon Moesching <ramon.moesching@netmodule.com>
 2020-03-20 02:09:11 +01:00
Rene Straub 2844abe1c2 nrhw20,24: board: respect ngpios entry 
determine number of gpio entries in ft_set_gpio_name()

BugzId: 60387
 2020-03-20 02:06:09 +01:00
Rene Straub a583bb6eea nmhw21: fct_atecc: add factory test for ATECC chip 
BugzID: 61904
 2020-03-20 02:04:55 +01:00
Rene Straub ce70a04c33 nrhw: sync with NRSW, dualcan-passive shield fixes 
BugzId: 61778
 2020-02-27 14:10:43 +01:00
Rene Straub 41742d2865 nrhw: cleanup, let reset reason check in SPL 2020-02-27 07:23:13 +01:00
Rene Straub 7c3defb4e0 nrhw: enable dtb entries for passive can shield 2019-12-19 07:44:34 +01:00
René Straub 3274638d7d nrhw: support dual can passive shield (#38) 2019-12-12 12:13:23 +01:00
Rene Straub 7620f09ce4 nrhw: fix control pins for dual-can shield 
- control io were swapped
- termination was applied to wrong port

BugzId: 60563
 2019-12-12 09:20:44 +01:00
Lucien Mueller a93f6f3874 nmhw21: sync ui leds with onboard leds. 
BugzID: 59055

Signed-off-by: Lucien Mueller <lucien.mueller@netmodule.com>
 2019-11-29 16:02:02 +01:00
Rene Straub e940bb1802 am335x: add NRSW support for nmhw[20,21,24] 
- NRSW board features
- memory layout update
- boot configuration update
- general cleanup

BugzID: 60384

Signed-off-by: Patrick Zysset <patrick.zysset@netmodule.com>
 2019-11-29 14:08:31 +01:00
Rene Straub 0530de83a0 nmhw24: remove debug print from ft_set_gpio_name() 2019-11-16 16:28:14 +01:00
Rene Straub 0cde66a780 nmhw24: configure com/io shield gpios in dtb 
when a COM/IO shield is detected, its two IOs
are given names in the gpio section so that they
are accessible from Linux gpio chardev.

BugzId: 60150
 2019-11-16 13:17:11 +01:00
Rene Straub 19271e52e9 nrhw20: general cleanup of board files 2019-11-01 12:26:31 +01:00
Rene Straub 64a2a57636 nmhw21: general cleanup of board files 2019-10-30 19:41:53 +01:00
Rene Straub ace146330e nmhw24: don't enable uart0 in DTS by default 
- when using CAN shield, uart0 must not be enabled or I/O
  pins are locked by uart.
- this was a backport from NRSW that has to be checked
 2019-10-24 09:17:11 +02:00
Rene Straub bb120c7271 nmhw24: align board file with nrsw implementation 2019-10-10 17:54:08 +02:00
Rene Straub 44ad609219 nmhw: update board descriptor tags 
- add missing tags
- fix documentation errors
 2019-10-10 13:29:42 +02:00
Rene Straub b1f61bad65 nrhw24: add pmic reset reason detection 2019-09-27 11:40:31 +02:00
Rene Straub a2438d7bd1 nrhw24: synchronize mux settings with nrsw code 2019-09-26 19:09:24 +02:00
Rene Straub a8cc1f2d85 da9063: move driver to common netmodule codebase 
- change nmhw21, nrhw24 makefiles/include
- change nrhw20 to use improved da9063 code (bus claim/release)
 2019-09-26 18:38:57 +02:00
Rene Straub d9bbba2295 nmhw: add support for late console initialization 
- backport from nrsw to support COMIO shield
 2019-09-26 08:19:19 +02:00
Rene Straub aea345876d nmhw: cleanup/align with nrsw code 2019-09-25 11:10:25 +02:00
Rene Straub afbe8bf08d nmhw: update emmc device names 
- kernel 4 uses mmcblk1 instead of mmcblk0
- update documentation accordingly
 2019-09-25 10:58:09 +02:00
Rene Straub a28cffaf0f nmhw24: rename to nrhw24 2019-09-25 10:43:32 +02:00
Ramon Moesching cd9281a619 nmhw21 board.c: turn off indicator led in board_init() 
BugzID: 59055

Signed-off-by: Ramon Moesching <ramon.moesching@netmodule.com>
 2019-09-20 11:43:00 +02:00
Rene Straub 803e05c65c nmhw21 - update pmic driver from nmhw24 
- use C types instead of uboot types
 2019-09-07 12:28:23 +02:00
Rene Straub f3c79d769b nmhw24 - update pmic registers 2019-09-07 12:22:23 +02:00
Rene Straub 88426e4041 nmhw21 - change PMIC config to synchronous mode 
in rare cases the default automatic mode switching can disable a power
rail. To prevent this all used buck regulators are configured to
synchronous mode.
 2019-09-07 11:05:09 +02:00
Rene Straub 5488c0795d nmhw21: cleanup 
- fix formatting
- remove unused variable
 2019-09-07 10:20:30 +02:00
Lucien Mueller 8ec934e776 Give UM more time to boot. 
Signed-off-by: Lucien Mueller <lucien.mueller@netmodule.com>
 2019-08-26 13:02:10 +02:00
Rene Straub 2c5343e02b nmhw24: prepare shield support 2019-08-23 07:35:36 +02:00
Rene Straub 70b14b3131 nmhw24: code cleanup 2019-08-16 16:20:38 +02:00
Rene Straub 5345ae1a18 nmhw24: correct led assignment 2019-08-16 15:15:45 +02:00
Rene Straub a0de5b0e8e nmhw24: fix PMIC accesses 
PMIC access needs to be enclosed in claim/release bus functions.
 2019-08-14 09:07:57 +02:00
Rene Straub dc7afab487 nmhw24: enable wifi supply at startup 2019-08-14 09:07:57 +02:00
Rene Straub 909be035f4 nmhw24: created target 2019-08-14 09:07:57 +02:00
Rene Straub 5c5c0b98fe nmhw21: don't power up GSM modem at startup 
BugzID: 57459
 2019-06-12 12:59:11 +02:00
Rene Straub ccb5de587f nmhw21: provide bootloader version in device tree 2019-06-04 08:00:02 +02:00
Rene Straub 87657dd68f nmhw21: fix wrong hw version of user module 
- hw version of UM was set to version of base board
 2019-04-01 15:06:35 +02:00
Rene Straub 29d7a20fdb nmhw21: support for user module device tree node 
- fill out /user_module node with:
  - status: okay/disabled
  - model: UM type
  - hw version/revision
  - network configuration
- show product variant in boot log
- set product variant in device tree /model
 2019-03-30 14:14:46 +01:00
Rene Straub 3e938e9ab8 nmhw21: add support for UM network config 
- get network configuration from UM via I2C
- provide method to retrieve IP and mask
 2019-03-30 12:22:47 +01:00
Rene Straub db067fefdd nm: cleanup board descriptor library 
- fix documentation/license information
- fix missing includes (dependancies, own header file)
- fix declaration mismatches
- fix data types
- fix parentheses
- fix order of functions in source/header
 2019-03-30 11:07:39 +01:00